HP I 1000Base-T, HSC/I 1000Base-SX manual RFC 1213 MIB, Field Description

Page 58

Gigabit Ethernet lanadmin Display

RFC 1213 MIB II

RFC 1213 MIB II

Following are descriptions of the statistics ﬁelds in the lanadmin(1M) command display. For more detailed information about the ﬁelds, refer to RFC 1213.

Field	Description
Network Management ID	A unique ID assigned by the system for the network
	management of each network interface.
PPA Number	A unique number assigned to each network interface,
	distinct from NMID.
Description	A textual string containing information about the
	interface.
Type (value)	The type of interface, distinguished according to the
	physical/link protocols, immediately below the
	network layer in the protocol stack.
	Gigabit Ethernet can have one of the following
	values: ethernet or IEEE 802.3.
MTU Size	The size of the largest datagram which can be
	sent/received on the interface speciﬁed in octets. This
	value can be 1500 or 9000.
Speed in bits per second	The speed of the card — 1000 Mbps for 1000Base-SX
	and 10, 100, or 1000 Mbps for 1000Base-T.
Station Address	The interface address at the protocol layer
	immediately below the network layer in the protocol
	stack. For interfaces which do not have such an
	address, such as serial line, this object contains an
	octet string of zero length.
Administration Status	The status of the card. This parameter is set to up(1)
	and is not conﬁgurable. It will have one of the
	following values:
	up(1)	Ready to pass packets
	down(2)	Not operative
	testing(3)	In test mode
Operation Status	The status of the link. This value is the same as the
	administration status. If the value is up, the link is
	operational.
Last Change	The value of SysUpTime at the time the interface
	entered its current operational state. If the current
	state was entered prior to the last reinitialization of
	the local network management subsystem, then this
	object contains a zero value.

56	Appendix A

Image 58

Contents Manufacturing Part Number J5683-90002 E0602 Legal Notices Page Page Preface Page Introduction Features Product OverviewDifferences Between gelan and igelan Performance on A6794A, A6847A, and A6825AProduct Description Driver Supported Systems Operating Name About this ManualList of Gigabit Ethernet Products GelanAbout this Manual About this Manual Chapter Conﬁguring Gigabit Ethernet Generic Parameters Understanding the Gigabit Ethernet ParametersLink Parameters Speed Duplexity Autonegotiation Performance Tuning ParametersReceive ﬂow control Performance Tuning Parameters Name Range Default UnitsUsing the lanadmin Tool with Gigabit Ethernet $ lanadmin -Astationaddr nmid/ppaOption Display Displaying ValuesExamples Setting Values Option Setting$ lanadmin -X stats clear nmid/ppa Gigabit Ethernet Resources HP-UX Manual Reference Pages Manuals Available for Gigabit Ethernet Other Useful ManualsError Messages Logging MessagesNettl -traceoff -entity igelan Contacting Your HP Representative Lanadmin -x cardinfo nmid lanadmin -x stats drv nmid Contacting Your HP Representative Chapter Troubleshooting Troubleshooting Overview Diagnostic Flowcharts Chart Type of Test PurposeFlowchart Flowchart 1 Cable and LED TestOperational Flowchart 1 Procedures Flowchart 2 Link Level Test Flowchart 2 Procedures Flowchart 3 Network Level Tests Flowchart 3 ProceduresFlowchart 3a Procedures Flowchart 3a ARP TestFlowchart 3a Flowchart 3b ping Test Flowchart 3bFlowchart 3b Procedures Flowchart 3b Flowchart 3b Procedures Flowchart 4 Transport Level Test Flowchart 4 Procedures Flowchart 5 Bridge/Gateway Loopback Test Flowchart 5 Procedures Flowchart 6 Conﬁguration Tests Flowchart 6 Procedures Flowchart 6a ioscan and lanscan Test Flowchart 6aFlowchart 6a Procedures Flowchart 6b netfmt and lanadmin Test Flowchart 6bFlowchart 6b Procedures Flowchart 6c ifconﬁg Test Flowchart 6cFlowchart 6c Procedures Diagnostic Flowcharts Chapter Gigabit Ethernet lanadmin Display LAN Interface Status Display LAN Interface Status DisplayHP-UX 11.0 lanadmin output RFC 1213 MIB Field DescriptionRFC 1213 MIB RFC 1284 Ethernet-Like Interface Statistics Gigabit Ethernet Card Statistics Card Statistics Output Field Description Driver Statistics Host Command StatisticsExplanation of Card Statistics NIC Events StatisticsExplanation of Card Statistics Appendix B Hardware Reference Information Table C-2 LED Description and Status for 1000Base-T Meaning of the LEDsTable C-1 LED Description and Status for 1000Base-SX LED Description On Steady Flashing Off ColorTable C-3 Cabling Requirements for 1000Base-SX Cabling RequirementsBack-to-Back Connection Table C-4 Cabling Requirements for 1000Base-TCard Speciﬁcations A4924A/A4925A/A4926AA4929A A6825A/A6847A Hardware Regulatory Statements FCC Statement For U.S.A CanadaVcci Japan PCI Card Only EMI Australia and New ZealandEMI Statement European Community Laser Safety Statements Laser Safety European Union Optical Transceiver OnlyLaser Safety Statements Appendix D Laser Safety Statements Appendix D Laser Safety Statements Appendix D Laser Safety Statements Appendix D Glossary NumericsGlossary Glossary