HP A5150A manual Interface Descriptions, PCI Interface, Scsi Interface

Page 11

HP A5150A Adapter Overview

Interface Descriptions

Interface Descriptions

This section provides greater detail about the PCI, SCSI, and Wide Ultra2 SCSI interfaces.

The PCI Interface

PCI is a high-speed standard local bus for interfacing a number of I/O components to a processor and memory subsystem. The PCI functionality for the A5150A is contained within the I/O Processor Chip. The adapter connects directly to the PCI bus and generates timing protocol in compliance with the PCI application.

The PCI interface operates as a 32-bit or 64-bit DMA bus master. The connection is made through the edge connector J1 (see Figure 1-1 on page 9). The signal definitions and pin numbers conform to the PCI Local Bus Specification Revision 2.1 standard. The A5150A conforms to the PCI universal signaling environment for a 5 volt or 3.3 volt PCI bus.

The SCSI Interface

The SCSI functionality for the A5150A is contained within the PCI-SCSI I/O Processor Chip. The adapter connects directly to the two SCSI buses for 16-bit SE or LVD SCSI applications and generates timing and protocol in compliance with the SCSI standard. Each SCSI interface operates at a burst transfer rate of up to 40 MBytes per second for wide single-ended transfers, and up to 80 MBytes per second for wide LVD SCSI transfers.

The two SCSI interfaces on the host bus adapter card operate as 16-bit, synchronous or asynchronous, single-ended or LVD, and support Ultra2 SCSI protocols and 16-bit arbitration. The interface is made through connectors J2 and J5 for channel A and J3 and J4 for channel B. Connectors J2 and J3 are 68-pin, VHDCI right- angle receptacles that protrude through the ISA/EISA bracket.

The adapter supplies SCSI bus TERMPWR (termination power) through a blocking diode and auto-resetting current-limiting device. Each SCSI channel has two LEDs to indicate the terminator’s power (TERMPWR) status. The TERMPWR Good (Channel A or B) LED indicates when the termination power is above 3.0 volts. The TERMPWR Shorted LED

Chapter 1

11

Image 11
Contents Manufacturing Part Number A5150-96002 E0201 EditionLegal Notices Page Page Contents Glossary HP A5150A Adapter Overview HP A5150A Adapter Overview A5150A PCI Ultra2 Scsi Host Bus Adapter About the A5150A AdapterFeatures Scsi Interface Interface DescriptionsPCI Interface Wide Ultra2 Scsi Interface A5150A Supported HP 9000 and HP e3000 Servers Supported HP 9000 and HP e3000 ServersAdapter Description Product Option Number Cables for Connecting External Scsi Devices to the A5150ACable Specifications Installing the A5150A Adapter Installing the A5150A Adapter Preparing for Installation Handling the A5150A Adapter Before You Start Looking at Adapter InstallationImportant Terms and Concepts Install Using Olar HP-UXOlar Important Terms MeaningCard Compatibility Planning and PreparationLooking at Adapter Installation OLA/R Restrictions for the A5150A A5150-60001 Default Scsi Attribute ValuesAttribute Default Value Install/Replace With System Powered Down Step Scsi Cable Connecting the Scsi PeripheralsMaking External Scsi Bus Connections Making Internal Scsi Bus Connections Auto Termination Information Scsi Bus TerminationHP 9000 System PDC Version Bus TerminationAuto Termination PDC Versions When To Turn Off Auto Termination When and How to Turn Off Auto TerminationScsi Bus Termination How to Turn Off Auto Termination PCI Device Information Scsi term 0/2/0/0 on Setting Scsi IDsScsi Device Channel a Scsi Device Channel B Record of Scsi IDsVerifying Installation Verifying Installation HP e3000 Troubleshooting Troubleshooting General Procedure Clearpim Checking Scsi Bus CompatibilityDisplaying Transfer Rates Scsi CommandSetting Transfer Rates Displaying Scsi IDs Setting Scsi IDs Using Support Tools Manager STM Contacting Your Hewlett-Packard Representative Contacting Your Hewlett-Packard Representative Contacting Your Hewlett-Packard Representative Chapter Scsi Sense Codes Scsi Sense Codes Status Code Table A-1 Scsi Status CodesSense Key Table A-2 Scsi Sense KeysAddition Qualifier Al Sense Code Table A-3 Scsi Additional Sense Code/Qualifier Code PairsLogical unit not ready, cause not Meaning Addition Qualifier Al Sense Code Recorded entity not found Recovered data with error correction Applied Logical block address out of range Commands cleared by another initiator Sequential positioning error Target operation conditions have Changed Write append error Log exception 0x69 0x00 Regulatory Information DOC Statement Canada Regulatory StatementsFCC Statement For U.S.A. Only IEC Statement WorldwideVcci Statement Japan Spécification ATI Classe a FranceDeclaration of Conformity CPU central processing unit GlossaryAsynchronous Data Transfer Nvram For each Scsi host adapter ROM Read-Only Memory RAM Random Access

A5150A specifications

The HP A5150A is a notable addition to HP's extensive line of desktop computers, designed to cater to both home and office users looking for a balance of performance and value. This model is characterized by its robust build and a range of features that enhance versatility and usability.

One of the standout features of the HP A5150A is its processor options. It typically comes equipped with a dual-core AMD Athlon processor, which provides ample power for everyday tasks such as web browsing, document editing, and multimedia playback. For users needing a little more performance, the system supports upgrades, allowing for future enhancements as demands change.

In terms of memory, the A5150A generally includes 1GB of DDR2 RAM, with options to expand depending on user needs. This flexibility ensures that users can manage multiple applications simultaneously without experiencing significant slowdowns, making it suitable for light multitasking.

Storage is another critical characteristic of the A5150A. The desktop commonly features a 160GB hard drive, offering enough space for essential files, programs, and media. However, users can benefit from additional storage options, as the unit typically supports multiple hard drive configurations, allowing for increased capacity or redundancy with RAID setups.

Graphics capabilities are addressed by an integrated ATI Radeon graphics processor, enabling decent performance for casual gaming and media playback. While it may not meet the demands of high-end gaming, the graphics hardware is sufficient for most users' everyday needs.

Connectivity features on the HP A5150A are comprehensive. It often includes multiple USB 2.0 ports for peripherals, audio jacks for headphones and microphones, and Ethernet connectivity for network access. Furthermore, connectivity options like VGA outputs provide compatibility with a variety of displays, enhancing the desktop's functionality.

The HP A5150A also places an emphasis on ease of use and manageability. With HP's user-friendly design, tasks such as upgrading components or performing maintenance can generally be completed without extensive technical knowledge. This focus on user accessibility is a significant advantage, especially for small business environments.

In summary, the HP A5150A stands out for its reliable performance, versatility, and user-friendly design. With features catering to both casual users and business applications, this desktop remains a solid choice for those in search of value without compromising essential functionalities. Its upgrade potential ensures that it can evolve alongside user needs, making it a lasting investment in the realm of personal computing.