Connecting to a Windows NT Server | HP 3C339 instruction

3 Connecting to a Windows NT Server 3.51

Windows for Workgroups Ver. 3.11

3 Connecting to a Windows NT Server 3.51

Windows for

Workgroups Ver. 3.11

•HP Vectra VE7/VE8 with DOS and MS-Windows for Workgroups 3.11 in- stalled.

•3COM Token Ring 3C339 card and drivers disk ver. 5.0.

DOS ODI - File Name: Tl3c3x9.dos Size: 52KB Date: 2/28/97

•DOS and MS-Windows for Workgroups 3.11 media.

•Microsoft Windows NT Server 3.51 machine that supports Net BEUI, NWLink IPX/SPX, and NWLink NetBIOS transfer protocols.

•	I/O Base Address	DC00
•	Interrupt Request Level	10

1With the HP Vectra VE7/VE8 set to PNP enabled, turn the machine off install the 3COM 3C339 adapter card into an PCI slot.

2Power on the machine and allow it to boot to a DOS prompt.

3Insert the 3COM drivers diskette and execute 3C3x9CFG.EXE.

4Select “CONFIGURE NIC,” and verify the resource settings listed above under the heading “Device Configuration.”

5If changes are required, save those changes and exit.

6Remove the 3COM cards driver diskette and insert Netware client for DOS and MS-Windows disk 1.

7Execute INSTALL.EXE.

8Specify the settings as listed below:

❒Yes