HP 3C339 manual Windows

Page 20

4. Connecting to a Windows NT Server 4.0

Windows for Workgroups Ver. 3.11

C:\WINDOWS

No

9Under the heading “Select the driver for your network board”, insert the 3Com 3C339 drivers disk and set the path to “A:\NETWARE\CLIENT.” (If you have an HP preloaded HDD, set path to “C:\Masters\LanDrv\3C339\NWCLIENT\)

10Press “Enter” to continue the installation.

11When prompted, insert the corresponding disks to complete file transfer and driver installation.

12When the install utility is finished, press <CRTL><ALT><DEL> to restart the machine.

13After Windows loads, open the “NETWORK” folder, double-click the “NETWORK SETUP” icon.

14At the “Network Setup” dialog box, click on “OK”.

15Specify your User Name, Workgroup, and Computer Name in “Microsoft Windows Network Names” dialog box, and click on “OK”.

(The Drivers will now start to copy)

16Finish the network card installation by clicking on “OK” in the “Network Setup” message.

17To complete the installation, click on “Restart Computer” button in the “Windows Setup” dialog box.

Image 20
Contents TokenLink Velocity PCI Network Interface Card 3C339 Page Connecting to a Netware 3.12 Server \NWCLIENT Windows 95 SR2 Requirements Windows 95 SR2 Connecting to a Netware 4.11 Server \NWCLIENT NWLink NetBIOS transfer protocols Windows 95 SR2 Connecting to a Windows NT Server \WINDOWS HP Vectra VE7/VE8with Windows 95 SR2 Windows 95 SR2 Windows NT Workstation Version Requirements Windows NT Workstation Version Windows NT Workstation Requirements Windows NT Workstation Windows for Workgroups Ver \WINDOWS Windows 95 SR2 Requirements Windows 95 SR2 Windows NT Workstation Version Requirements Windows NT Workstation Version Windows NT Workstation Requirements Windows NT Workstation Windows NT Workstation Windows NT Workstation Page Version Number 3COM 339 Rev.1