HP xp8020, xp8010 manual Safety Information, Safety precautions, Laser safety

Page 90

Reference

Safety Information

Safety precautions

To prevent eye injury, do not look into the lens when the lamp is on. Do not point any laser light at anyone's eyes.

To prevent electrical shock, do not expose the projector to rain or moisture. Do not open the projector except as instructed by the manual.

Allow the projector to cool before removing any cover and touching internal components, as instructed by the manual.

Keep paper and other combustible material away from the projector lens to prevent the possibility of fire.

Use only an approved power cord rated for the voltage and current marked on the product label. Do not overload any outlet or extension cord.

Laser safety

The laser pointer on the remote control is certified as Class 2 laser device according to the U.S. Department of Health and Human Services (DHHS) Radiation Performance Standard and International Standards IEC 825/IEC 825-1 (EN60825/EN60825-1).

This device is not considered harmful, but the following precautions are recommended:

Ensure proper use by reading and following the instructions carefully.

If the unit requires service, contact an authorized HP service center.

Do not attempt to make any adjustment to the unit.

Avoid direct exposure to the laser beam.

90

Reference Guide

Image 90
Contents Xp8010 series digital projector Reference guide Second Edition April Contents Adjustments Maintenance Index Installation and Setup Identifying the contents of the box Symbol Function What’s in the Box?Identifying Common Features Identifying the projector Symbol Function Projector at a glanceProjector buttons and lights Identifying buttons and lights on the projectorBack panel Identifying the back panelRGBHV, and YPbPr output Remote control Identifying the remote control with case closedIdentifying remote control with case open Symbol Function Accessories Selecting a Location ImageTo install on a table To install on the ceilingCalculating projection dimensions Installation and Setup Installation and Setup To install for rear projection To install the cable shroud To connect power Turning On and OffTo turn the projector on To operate the remote control To turn the projector offTo reset the projector Making Initial Connections To connect input sourcesComputer with VGA cable connection Computer with M1-to-VGA cable connection Computer with M1-to-DVI cable connectionVCR with composite video cable connection Video equipment connectionDVD or Hdtv with component-video cable connection SCART-device connectionRGB-equipment connection RGBS-equipment connectionTo connect output devices RGBHV-equipment connectionTo connect control equipment Configuring the Projector To change settings using the on-screen menuTo set up network access Securing the Projector Adjustments Making Basic AdjustmentsTo aim the projector To adjust the focus and zoom To adjust the audioAdjusting the Picture To adjust the image according to type of pictureTo adjust other image settings To make adjustments from the web Adjustments Connecting and Preparing PresentationsTo connect a computer using a VGA cable To connect a handheld organizer To connect a computer using other types of cables M1 to VGA/USB connectionM1 to DVI/USB connection To connect other video sources DVD player connectionVCR connection Showing Presentations To present from a computerTo change the source To hide or show the displayDisconnecting Presentations Managing the Projector To find the IP addressTo set basic projector properties To set up email for notifications To protect configuration changesAccount Upgrading the Projector To update the firmwareUpgrade Web MethodTo install an add-on lens Identifying lens range Lens Distance Distance/Width RatioSystem Management To change the connectivity module System Management Maintenance Using the On-Screen MenuQuick Choice menu Input menuInput Adjust Picture menu Adjust pictureAdjust picture Setup menu Audio menuSetup Help menuPerforming Routine Maintenance To clean the projector lensTo get the projector status To replace the lamp module To replace the battery in the remote control Troubleshooting Troubleshooting SuggestionsStart-up problems If no lights or sounds turn onPicture problems If the wrong input source is displayedIf the image is out of focus If the image has slanted edges If an upside-down or reversed image is displayedIf the image is too small or too large If a scrolling or cut-off image is displayedIf the image disappears from the computer screen If the image is flickering or unstableIf the image is stretched If the projected colors seem slightly wrongIf the projected colors seem completely wrong If a VGA monitor displays a bad picture for certain inputsIf the projector stops responding to all controls Sound problems If no sound is coming out of the projectorInterruption problems If the lamp shuts off during a presentationIf the lamp burns out or makes a popping sound If the remote control does not operate Remote control problemsNetworking problems If you cannot access the projector via the webIf you forget the projector’s web administrator password Testing the Projector To run the projector diagnosticsTroubleshooting Specifications Identifying the projector specificationsReference XGA Analog Video Mode Compatibility Resolution Sync kHzAnalog Video Mode Compatibility Sync Hz Sync kHzDigital Video Mode Compatibility 1280 x 79.98 Safety Information Safety precautionsLaser safety LED safety Mercury safetyRegulatory Information CanadaConnections to peripheral devices Japan Korea International Declaration of ConformityIndex See Reference Guide installing See Reference Guide notifications See network testing
Related manuals
Manual 9 pages 40.28 Kb Manual 8 pages 15.13 Kb Manual 2 pages 53.84 Kb Manual 8 pages 16.79 Kb Manual 2 pages 26.63 Kb

xp8010, xp8020 specifications

The HP MP3135w, XP8020, MP3135, MP3130, and XP8010 are part of a series of multifunction printers that cater to a diverse range of printing needs, from home offices to larger business environments. Each model showcases unique features, advanced technologies, and robust characteristics that set them apart in the competitive printing market.

The HP MP3135w is known for its wireless connectivity, making it easy for users to print from a variety of devices, including smartphones and tablets. This model supports mobile printing protocols such as AirPrint and Google Cloud Print, enhancing convenience for users who require flexibility in their printing tasks. It boasts a compact design without compromising output quality. The MP3135w is equipped with a reliable printing engine, capable of producing sharp text and intricate graphics with a resolution that ensures professional-quality printouts.

The XP8020 stands out with its all-in-one capabilities, offering printing, scanning, copying, and in some iterations, faxing. This multifunctionality makes it ideal for small businesses or home offices where space is limited. It features touchscreen navigation, simplifying operation and enhancing user experience. The XP8020 also supports high-volume printing, benefiting businesses with significant output demands and quick turnaround times.

The MP3135 and MP3130 share commonalities in their design and printing technologies. Both models utilize inkjet technology, providing vibrant color and precise text quality. They are designed for ease of setup and maintenance, with user-friendly interfaces that allow for effortless operation. Furthermore, they incorporate energy-efficient technologies, such as automatic duplex printing, which saves paper and reduces overall costs.

Lastly, the XP8010 is recognized for its fast print speeds, particularly for high-volume tasks. This model is well-suited for environments that require quick turnaround and efficiency. With features like borderless printing, the XP8010 allows users to create stunning photos and marketing materials with edge-to-edge color.

In summary, the HP MP3135w, XP8020, MP3135, MP3130, and XP8010 are versatile printing solutions that cater to a range of users, from casual home users to professional environments. Their combination of connectivity options, multifunction capabilities, and efficient printing technologies make them a valuable asset for those looking to enhance their productivity and print quality.