Setting Up
Making Basic Adjustments
This section provides instructions on making basic adjustments to the projector.
■“To aim the projector” on page 26
■“To adjust the focus and zoom” on page 27
To aim the projector
■To raise the projected picture on the screen, press the height adjustment button 1 and lift the front of the projector to the desired display angle 2. Release the button to lock the adjustment.
■To lower the projected picture, press the height adjustment button while lowering the front of the projector. Release the button to lock the adjustment.
■To store the projector, press the height adjustment button and lower the projector fully, then release the button.
1
2 
When you tilt the projector up or down, the sides of the picture might become slanted. To adjust the picture so the sides are vertical, see “To adjust a slanted picture” on page 33.
If the picture is not level on the screen, screw the adjustable back foot in or out to level the projector.
26 | User’s Guide |