HP mp3222 manual Maintaining the Projector

Page 45

Maintaining the Projector

1.Turn off the projector and allow it to cool for 30 minutes.

2.On the bottom of the projector, loosen the two screws on the lamp cover and remove the cover.

3.Loosen the two screws on the lamp module and pull out the module.

4.Insert the lamp module and tighten the two screws.

5.Install the cover and tighten the two screws.

6.Turn on the projector. If the lamp does not turn on after the warm-up period, try reinstalling the lamp again.

7.Open the on-screen menu and select Setup > Reset lamp hours.

User’s Guide

45

Image 45

Contents Mp3220 series digital projector User’s guide First Edition May Contents Adjusting the Projector Index Contents Setting Up What’s in the Box? Identifying the contents of the box Symbol FunctionIdentifying Common Features Projector at a glance Identifying the projector Symbol FunctionProjector buttons and lights Back panel Identifying the back panel Symbol FunctionRemote control Accessories Setting Up the Projector To position the projector Calculating projection dimensions To set up on a tableTo connect power To connect a computer To connect a handheld organizer To connect video sources Setting Up Setting Up To turn the projector on Turning On and OffTo turn the projector off To aim the projector Making Basic AdjustmentsTo adjust the focus and zoom Setting Up Giving Presentations Using the Remote ControlGiving Presentations To present from a computer Showing PresentationsTo hide or show the display To change the sourceAdjusting the Projector Adjusting the Picture and SoundTo adjust a slanted picture To adjust the image according to the type of picture To adjust other image settingsTo adjust the audio To adjust the projector setup Using the On-Screen Menu Or down to quickly move to another setting and adjust it To change settings using the on-screen menuQuick choice Quick choice menuFor a visual aid, see Back panel on Select input menuAdjust picture Adjust picture menuAdjusting the Projector Help menu Setup menuPerforming Routine Maintenance Maintaining the ProjectorTo get the projector status To replace the lamp module To clean the projector lensMaintaining the Projector To replace the battery in the remote control Upgrading the Projector To update the firmwareMaintaining the Projector Installing Permanently Installing the ProjectorTo install on a table To install on the ceiling Installing Permanently To install for rear projection To mount the projector on a tripod To lock the projectorInsert the lock 1 into the hole and twist the key Installing Permanently Troubleshooting Suggestions Fixing ProblemsIf no lights or sounds turn on Start-up problemsPicture problems Fixing Problems Fixing Problems Fixing Problems Interruption problems Sound problemsRemote control problems To run the projector diagnostics Testing the ProjectorFixing Problems Specifications Identifying the projector specificationsReference Reference Storage Sync Hz Sync kHz Analog Video Mode CompatibilityMAC II Safety precautions Safety InformationMercury safety LED safetyCanada Regulatory InformationJapan Korea Declaration of Conformity InternationalConfiguration Hide button using Image adjustingInstallation See ceiling installation Connecting video source Locking 53 setup AdjustingZoom adjusting 27 range Slanted picture See keystone correction soundIndex

Related manuals

Manual 2 pages 33.55 Kb