HP mp3222 manual Adjusting the Projector

	Adjusting the Projector
Adjust picture (continued)
Tint	Shifts colors toward red or green.
Red	Adjusts the amount of red in the picture.
Green	Adjusts the amount of green in the picture.
Blue	Adjusts the amount of blue in the picture.
Color space	For certain component inputs, selects the type of
	signal encoding used by the input source. You can
	override the selection made by the projector.
Reset color settings	Resets these color settings to their default settings.
Shape settings...	Adjusts the shape of the picture.
Keystone	Corrects the slanted sides of an image.
Reset keystone	Resets keystone correction to zero.
Widescreen input	Sets whether a widescreen (16:9) input device is in
	use.
VGA settings...	Adjusts settings for the VGA input port.
Auto-sync	Resynchronizes the projector to the input signal from
	a computer. This can compensate for any change in
	the signal.
Frequency	Adjusts the timing of the projector relative to a
	computer graphics card.
Tracking	Synchronizes the projector to a computer graphics
	card.
Vertical offset	Shifts the image up or down within the projection
	area.
Horizontal offset	Shifts the image left or right within the projection
	area.
Reset video settings	Resets all video settings to default settings.

User’s Guide 41