HP mp2215, mp2210 manual Turning the projector on

Page 22

Turning the projector on

1.Be sure the power cord is connected and the lens cover is removed.

2.Press the power button on the projector or on the remote control.

The projector takes a minute or so to warm up. The power button blinks during warm-up.

TIP: If the picture does not appear on the screen, try the following:

•If you are using a computer, press the key combination that turns on its video output. For example, press FN+F4 or FN+F5 on some computers.

•On the projector, press the source button one or more times to select the correct input port.

NOTE: It is normal for parts of the projector and the air coming out of the projector to be very warm. If the projector starts to overheat, the temperature warning light will turn on and the projector will shut down.

22 Setting Up

Image 22

Contents HP mp2210 Series Digital Projector Page Contents Maintaining the Projector Setting Up Safety precautionsWhat’s in the box? Quick Setup Guide Projector at a glance Identifying common featuresIdentifying major components Projector buttons and lights Identifying the projector buttons and lightsBack panel Identifying12back panel componentsRemote control Accessories Setting up the projector Positioning the projectorImage size relative to distance from the screen Connecting power Connecting a computer Connecting a handheld organizer Connecting a video source Connecting a component-video source Connecting an S-video source Removing the lens cover Turning the projector on and offPull the lens cover off the lens Turning the projector on Turning the projector off Moving the projectorMaking basic adjustments Aiming the projectorAdjusting the focus and zoom Using the remote control Using the remote control Setting Up Selecting a different source Showing PresentationsShowing a computer screen Hiding or showing the pictureShowing Presentations Adjusting the picture Adjusting the ProjectorChoosing the best picture mode Adjusting the shape of the picture Adjusting a slanted picture Adjusting the picture for best color Adjusting other picture settings Adjusting the projector setupUsing the on-screen menu Changing settings using the on-screen menuQuick choice menu Quick choice menuInput menu For a visual aid, see Back panel on Input menuPicture menu Help menu Setup menuSetup menu HelpAdjusting the Projector Maintaining the Projector Performing routine maintenanceCleaning the projector and lens Getting the projector statusReplacing the lamp module Performing routine maintenance Replacing the battery in the remote control Upgrading the projector Updating the firmwareMaintaining the Projector Installing on a table Installing PermanentlyInstalling the projector Choosing cablesInstalling for rear projection Locking the projectorFixing Problems Troubleshooting suggestionsStart-up problems Picture problemsTroubleshooting suggestions Fixing Problems Interruption problems Remote control problemsTesting the projector Running the projector diagnosticsProjector Specifications SpecificationsReference Projector Specifications Video mode compatibility LED safety Safety informationMercury safety Regulatory information CanadaJapan Korea International CRVSB-05AR Index VGA Reference