HP mp2210, mp2215 manual Performing routine maintenance

Page 43

5.Loosen the two screws 2 on the lamp module, and pull out the module 3.

6.Insert the new lamp module into the projector and tighten the two screws.

7.Install the cover and tighten the two screws.

8.Turn on the projector. If the lamp does not turn on after the warm-up period, try reinstalling the lamp.

9.Press enter, go to Setup > Reset lamp hours, and press enter.

Performing routine maintenance 43

Image 43

Contents HP mp2210 Series Digital Projector Page Contents Maintaining the Projector Safety precautions Setting UpWhat’s in the box? Quick Setup Guide Projector at a glance Identifying common featuresIdentifying major components Identifying the projector buttons and lights Projector buttons and lightsIdentifying12back panel components Back panelRemote control Accessories Positioning the projector Setting up the projectorImage size relative to distance from the screen Connecting power Connecting a computer Connecting a handheld organizer Connecting a video source Connecting a component-video source Connecting an S-video source Removing the lens cover Turning the projector on and offPull the lens cover off the lens Turning the projector on Moving the projector Turning the projector offAiming the projector Making basic adjustmentsAdjusting the focus and zoom Using the remote control Using the remote control Setting Up Hiding or showing the picture Showing PresentationsShowing a computer screen Selecting a different sourceShowing Presentations Adjusting the picture Adjusting the ProjectorChoosing the best picture mode Adjusting the shape of the picture Adjusting a slanted picture Adjusting the picture for best color Adjusting the projector setup Adjusting other picture settingsChanging settings using the on-screen menu Using the on-screen menuFor a visual aid, see Back panel on Input menu Quick choice menuInput menu Quick choice menuPicture menu Help Setup menuSetup menu Help menuAdjusting the Projector Getting the projector status Performing routine maintenanceCleaning the projector and lens Maintaining the ProjectorReplacing the lamp module Performing routine maintenance Replacing the battery in the remote control Updating the firmware Upgrading the projectorMaintaining the Projector Choosing cables Installing PermanentlyInstalling the projector Installing on a tableLocking the projector Installing for rear projectionTroubleshooting suggestions Fixing ProblemsPicture problems Start-up problemsTroubleshooting suggestions Fixing Problems Remote control problems Interruption problemsRunning the projector diagnostics Testing the projectorProjector Specifications SpecificationsReference Projector Specifications Video mode compatibility LED safety Safety informationMercury safety Canada Regulatory informationJapan Korea International CRVSB-05AR Index VGA Reference