HP TM2 manual Heat sink, Description Spare part number

4.Remove the fan (3).

Reverse this procedure to install the fan.

Heat sink

NOTE: The heat sink spare part kit includes replacement thermal material.

Description	Spare part number
For use only on computer models equipped with discrete graphics subsystem	611499-001
For use only on computer models equipped with UMA graphics subsystem	611500-001

Before removing the heat sink, follow these steps:

1.Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.

2.Disconnect all external devices connected to the computer.

3.Disconnect the power cord.

4.Remove the battery (see Battery on page 35).

5.Remove the following components:

a.Hard drive (see Hard drive on page 37)

b.Top cover (see Top cover on page 48)

c.Keyboard (see Keyboard on page 50)

64 Chapter 4 Removal and replacement procedures ENWW