HP TM2 manual System Configuration menu, Diagnostics menu

System Configuration menu

Select	To do this
Language	Change the Setup Utility language.
Virtualization Technology (select models only)	Enable/disable the processor Virtualization Technology.
LAN Power Saving	Enable/disable the LAN power saving. Reduces the power
	consumption of the LAN controller.
Fan Always On	Enabled/disable Fan Always On. When enabled, the
	computer fan will always be on.
Action Keys Mode	Enable/disable the Action Keys.
Boot Options	Set the following boot options:
	● POST Hot Key Delay (sec.)―Set the delay for the user to
	press hotkeys in intervals of 5 seconds each (0, 5, 10,
	15, 20).
	● Floppy Boot―Enable/disable boot from diskette.
	● Internal Network Adapter Boot―Enable/disable boot
	from external Network Adapter.
	● Boot Order―Set the boot order for:
	◦	Notebook Hard Drive
	◦	USB Diskette on Key/USB Hard Disk
	◦	USB CD/DVD ROM Drive
	◦	USB Floppy
	◦	Network Adapter

Diagnostics menu

Select	To do this
Primary Hard Disk Self Test	Run a comprehensive self-test on the hard drive.
Memory Test	Run a diagnostic test on the system memory.

72 Chapter 5 Setup Utility (BIOS) ENWW