SPX Cooling Technologies 1000, 1200 specifications Thermal Performance, Alty on the manufacturer

Page 15

Marley / Sigma 1000/1200 CoolingTower / Specifications: Base

Specifications

Specification Value

2.0Thermal Performance:

15

2.1

The tower shall be capable of cooling

■Your reason for purchasing a cooling tower is to obtain a con-

 

_____ GPM of water from ____ °F to

tinuing flow of cooled water as defined in the first paragraph at

 

_____ °F at a design entering air wet-

left. If the tower that you purchase is incapable of performing

 

bulb temperature of _____ °F. The cool-

as specified, then you will not have received full value for your

 

ing tower manufacturer shall guarantee

money.

 

that the tower supplied will meet

Bear in mind that the size—and cost—of a cooling tower var-

 

the specified performance conditions

 

when the tower is installed according

ies directly with its true thermal capability. This paragraph is

 

to plans.

intended to protect you against either intentional or inadvertent

 

 

under sizing of the tower by the manufacturer. Judging the level

2.2

The purchaser will arrange for an

of performance of a cooling tower on critical processes is never

 

on-site thermal performance test, to

easy, and the potential risk of a non-performing cooling tower

 

be conducted in the presence of the

usually causes the requirement for a mandatory acceptance test

 

manufacturer and owner, and under

to be very desirable.

 

the supervision of a qualified, disinter-

Your contract with the successful bidder should establish the

 

ested third party in accordance with

 

CTI (Cooling Technology Institute) ATC-

acceptable remedies for missed performance, which might

 

105 standards during the first full year

include:

 

of operation. If the tower fails to per-

• The addition of one or more cells of tower, as necessary, to

 

form within the limits of test tolerance,

 

then the cooling tower manufacturer

bring the cooling tower to the specified level of performance.

 

will install additional cells and/or make

This is usually limited to the scope of work as defined in the

 

such corrections as are agreeable to

specs, which means that you (the owner) will have to pay for

 

the owner and shall pay for the cost of

the additional basin, wiring, starters, piping, etc.

 

a retest. If the tower still fails to per-

• The reimbursement of a portion of the total contract price equal

 

form as specified, then the manufac-

 

turer shall make such reimbursements

to the percentage deficiency in performance.

 

as are appropriate and agreeable to the

Under no circumstances should you allow the manufacturer to

 

owner to compensate for the perfor-

 

mance deficiency.

re-pitch the fans to increase motor brake horsepower above that

 

 

shown in the proposal. That creates additional operating costs

 

 

that will continue for the life of the tower—and imposes no pen-

 

 

alty on the manufacturer.

 

95°

 

 

 

 

 

 

 

90°

 

 

 

 

 

 

 

85°

 

 

 

 

 

 

(°F)

 

 

 

 

 

 

 

TEMP.

80°

 

 

 

 

 

 

 

 

 

 

 

 

5°F RANGE

WATER

 

 

 

 

 

 

75°

 

 

 

 

 

10°F RANGE

 

 

 

 

 

 

15°F RANGE

 

 

 

 

 

 

 

COLD

70°

 

 

 

 

 

 

 

 

 

 

 

 

 

 

65°

 

 

 

 

 

 

 

60°

 

 

 

 

 

 

 

55°

 

 

 

 

 

 

 

50°

55°

60°

65°

70°

75°

80°

WET BULB TEMP. (°F)

Typical cooling tower performance curve.

Page 14 Page 16
Image 15
Page 14 Page 16
Contents Marley Sigma 1000/1200 Cooling Tower Marley / Sigma 1000/1200 CoolingTower / Table of Contents Marley / Sigma 1000/1200 CoolingTower Height Maximum Static Model Endwall ElevationTower WidthPlan Dimensions ModelMarley / Sigma 1000 CoolingTower / Engineering Data Support Operating Weigt lb Model Flat Basin SectionWidth Length Height Maximum Static Model Endwall HElevationEndwall Elevation G Dimensions Model Per CellMarley / Sigma 1200 CoolingTower / Engineering Data Support Operating Weight lb Model Single Cell Each Cell Add Variable Speed Control Two-Speed MotorsSystem Cleanliness EnclosuresSound Control Base Marley / Sigma 1000/1200 CoolingTower / Specifications BaseThermal Performance Under no circumstances should you allow the manufacturer toAlty on the manufacturer Construction Indicated below and followingWood Fan Deck and Fan Cylinder Even in aggressive water conditions, the heavy constructionFan guard normally precludes the need for stainless steel Mechanical Equipment Unitized support normally precludes the need for stainlessSteel Fill, Louvers and Drift Eliminators Access Hot Water Distribution SystemCasing Scope of Work Cold Water Collection BasinSpecifications Specification Value Basin Heater Marley Premium VFD System Vibration Limit Switch Ladder Extension Convenience and Safety Options StairwayLadder Safety Cage Plenum WalkwayHot Water Basin Covers Oil Level Sight GlassMiscellaneous Options Wood Cold Water Basin Redwood ComponentsLow Noise Tower Watertight Partitions Between Cells Fire Safety OptionsPage Page West 129 Street Overland PARK, Kansas 66213 United States
Related manuals
Manual 12 pages 20.61 Kb

1000, 1200 specifications

SPX Cooling Technologies, a prominent player in the cooling solutions market, is known for its cutting-edge designs and innovations in the field of cooling systems. Among its notable offerings are the SPX Cooling Technologies 1200 and 1000 series, which are engineered to meet the demands of various industrial applications.

The SPX Cooling Technologies 1200 series is renowned for its efficiency and robust construction. One of its main features is its modular design, allowing for easy installation and maintenance. This series is equipped with advanced cooling technology, enhancing energy efficiency while minimizing operating costs. The 1200 series utilizes a counterflow design, promoting improved heat exchange and a more direct airflow pattern. This results in higher thermal performance and reduced energy consumption, making it an ideal choice for operations that prioritize sustainability and cost-effectiveness.

On the other hand, the SPX Cooling Technologies 1000 series is tailored for versatility and reliability. This series boasts a design that accommodates a range of capacities and configurations, making it suitable for diverse applications, including HVAC, industrial processes, and power generation. One of the standout characteristics of the 1000 series is its handling of large thermal loads with minimal pressure drop, which ensures optimal performance in challenging conditions. Its corrosion-resistant materials enhance durability, making it resilient in harsh environments.

Both series incorporate advanced fan technology, which is designed to maximize airflow while minimizing noise levels. The fans are individually controllable, allowing for precise adjustments to meet specific cooling demands. Furthermore, these cooling towers are designed with user-friendly accessibility, simplifying maintenance and inspection processes, thereby reducing downtime.

SPX Cooling Technologies also places a significant emphasis on innovation. Both the 1200 and 1000 series are built with predictive maintenance capabilities, leveraging IoT technologies to monitor performance metrics in real time. This proactive approach enables facility managers to anticipate maintenance needs and address issues before they escalate into costly failures.

In summary, the SPX Cooling Technologies 1200 and 1000 series represent a substantial advancement in cooling technology, providing efficient, reliable, and modular solutions for various industrial applications. Their design, efficiency, and advanced features position them as leaders in the market, responding to the evolving needs of industries worldwide.
Top Page Image Contents