HP dm4-1162us manual Disc does not play automatically, Movie stops, skips, or plays erratically

– or –

◦The playback window in the multimedia program may close. To return to playing the disc, click the Play button in your multimedia program to restart the disc. In rare cases, you may need to exit the program, and then restart it.

●Increase system resources:

◦Turn off printers and scanners, and unplug cameras and portable handheld devices. Disconnecting these Plug and Play devices frees up valuable system resources and results in better playback performance.

◦Change desktop color properties. Because the human eye cannot easily tell the difference between colors beyond 16 bits, you should not notice any loss of color while watching a movie if you lower system color properties to 16-bit color, as follows:

1.Right-click on a blank area of the computer desktop, and select Screen resolution.

2.Select Advanced settings > Monitor tab.

3.Select High Color (16 bit), if this setting is not already selected.

4.Click OK.

A disc does not play automatically

1.Select Start > Default Programs > Change AutoPlay settings.

2.Confirm that the Use AutoPlay for all media and devices check box is selected.

3.Click Save.

A disc should now start automatically when it is inserted into the optical drive.

A movie stops, skips, or plays erratically

●Press the Play button. You may have accidentally paused the movie.

●Clean the disc.

●Conserve system resources by trying the following suggestions:

◦Log off the Internet.

◦Change the color properties of the desktop:

1.Right-click on a blank area of the computer desktop, and select Screen resolution.

2.Select Advanced Settings > Monitor tab.

3.Select High Color (16 bit), if this setting is not already selected.

4.Click OK.

◦Disconnect external devices, such as a printer, scanner, camera, or handheld device.

46 Chapter 4 Multimedia