C A U T I O N
Starting Out with Your OmniBook
Using OmniBook Accessories
About RAM Cards
If you’re using a RAM card with the OmniBook, keep these suggestions in mind:
∙For a new RAM card, install its battery before you insert the card.
∙Replace the RAM card battery yearly.
When you want to replace a RAM card battery, plug the card into the OmniBook and make sure the OmniBook stays turned on while you replace the battery. You can plug in the ac adapter to keep it from turning off. Otherwise, the data on the card will be lost.
To remove a PC card
Never remove an I/O card while an application is open that’s set up to use that card. Exit the application first. If you remove the card, the application (or the OmniBook) might behave unpredictably or stop responding until you restart the OmniBook. Never insert or remove a plug
Otherwise, you could lose data or the OmniBook could stop responding.
1.If you’re using Windows 95
Click the PC card indicator in the taskbar, then click Stop. This protects your data and avoids unexpected problems. You can restart the card by removing it, then inserting again
If you’re using Windows for Workgroups Go to step 2.
2.If necessary, rotate the ejector button so that it protrudes from the case.
3.Press the black ejector button until the card pops out, then pull out the card.