HP Book 2000/5700 manual Replacing Hardware, To remove the hard disk drive

Page 53

Expanding the OmniBook

Replacing Hardware

Replacing Hardware

This section describes how to

♦Remove and install the hard disk drive.

♦Find the system software version and memory size.

♦Install a memory-expansion board.

To remove the hard disk drive

You can upgrade the OmniBook system by installing a new hard drive or you may want to switch hard drives between OmniBooks.

1.Important

Back up all the files on your current drive C. You can back up the files to a tape drive, a network drive, a PC card, or a flexible disk.

2.Unplug the adapter.

3.Exit Windows.

∙If you’re using Windows 95, use the shutdown option from the Start menu.

∙If you’re using Windows for Workgroups, exit Windows, then press the Off button.

4.Remove all batteries from the OmniBook.

5.Close the cover and turn your computer over.

6.Remove the screw and security cover located at the back of the hard disk drive.

7.Firmly slide the drive out of the drive compartment. (This requires some force.)

3-3

Image 53

Contents OmniBook 2000/5700 Installation and Setup Guide Page HP Software Product License Agreement Edition History Contents Expanding the OmniBook Changing the ConfigurationSpecifications and Regulatory Information Page Starting Out with Your OmniBook Starting Out with Your OmniBook To set up the OmniBook Setting Up the OmniBookTo select one of the factory-installed operating systems If you’re installing Windows for Workgroups Starting Out with Your OmniBook Setting Up the OmniBook Getting Comfortable Tour of the OmniBook To use the pointing device To adjust the displaySpecial features of the OmniBook keyboard To adjust the OmniBook keyboardTo connect a microphone, speakers, or headphones To adjust the speaker volumeTo stop the OmniBook To start the OmniBookOff button Effects of Stopping the OmniBook Power States after Stopping the OmniBookStarting Out with Your OmniBook Tour of the OmniBook Reset button To reset and restart the OmniBookData storage status To understand the status panelKeyboard status To attach a security cable Power statusUsing OmniBook Accessories To remove accessories from the OmniBook Parallel port To install the floppy disk driveTo insert and eject a floppy disk To install the CD-ROM drive To insert and remove a CD CD disk indicatorTo use the CD-ROM drive safely Fully charged battery To replace the batteryHigh-capacity battery To install a high-capacity batteryTo maintain and preserve battery life To handle and store the battery safelyTo insert a PC card To remove a PC card See the Online Documentation Where to Go from HereCheck OmniBook Notes Visit Our Web sitePage Installing an Operating System Installing an Operating System With the Support Utilities disk What the Recovery CD ContainsTo reinstall Windows Reinstalling WindowsInstalling an Operating System Reinstalling Windows To reinstall Windows for Workgroups Reinstalling Windows for WorkgroupsTo make DOS 6.22 and Windows for Workgroups disks To install Windows for Workgroups drivers To install Windows NT or OS/2 Warp Installing Windows NT or OS/2 WarpTo install HP software programs Installing HP ApplicationsExpanding the OmniBook Expanding the OmniBook To remove the hard disk drive Replacing HardwareTo find the system software version and memory size To install the hard disk driveWindows Windows for WorkgroupsTo add memory to the OmniBook Expanding the OmniBook Replacing Hardware Connecting Devices To connect an external monitor To adjust the display typeTo connect a printer To install a printerTo turn off the built-in display To connect both a mouse and keyboard To connect an external mouse or keyboardTo view or change serial port assignments To enable the Fn keysTo connect a serial device To specify serial port settings To view or change parallel port assignments To connect a parallel deviceTo print on an infrared printer To make an infrared connectionWhat you’ll need from your CD-ROM manufacturer To set up a PC card or parallel port CD-ROM drivePage Changing the Configuration Changing the Configuration Changing the Configuration To run HP User Tools Using HP User ToolsChanging the Configuration Using HP User Tools To run OmniBook Tools Using OmniBook ToolsOptions for Battery Power To run the SCU without rebooting Using the System Configuration UtilityTo run the SCU during reboot Boot Device Set User password Saving is active regardless of this setting Page Troubleshooting Suggestions in this chapter for getting back on track If the OmniBook turns off immediately after it turns on Solving Basic ProblemsIf the OmniBook stops responding If the OmniBook doesn’t respond at turn-onIf the OmniBook doesn’t reboot successfully If the screen is difficult to read If your system password doesn’t workPage Specifications and Regulatory Information Specifications and Regulatory Information Infrared one 4-Mbps bi-directional IrDA port Hardware SpecificationsMidi Software System ResourcesDMA Channels Power Cord, Plug, and Voltage Requirements Safety InformationBattery Safety LED Safety Laser SafetyWorking in Comfort Connections to Peripheral Devices Regulatory InformationJapan CanadaEMC EuropeIndex Index-2 Index-3