Water Distribution System | SPX Cooling Technologies 160 guide

Class 160 towers offer the benefits of adjustable pitch propeller type fans. All fans used on Class 160 towers include hollow GRE (glass-reinforced epoxy) blades and epoxy-coated cast iron or galvanized steel hubs. Blades are adjustable in pitch, so you can take full advantage of rated horsepower or adjust the pitch to compensate for unusual jobsite restrictions. The true airfoil blades, designed specifically for cooling towers, offer efficient, quiet operation and long service life.

Fans operate inside structural FRP (fiber-reinforced polyester) eased-inlet fan cylinders designed and applied to maximize fan performance. Standard cylinder heights are

6′-0″to 7′-0″, depending on fan diameter. 10′-0″cylinders are available as an option.

Marley-manufactured driveshafts transmit power from the motor to the Geareducer assembly. All Marley driveshafts include 304 stainless steel tubes with welded-on stainless steel flanges and bonded neoprene flexible elements to transmit torque. Marley driveshafts are full-floating assemblies with non-lubricated flexible couplings on each end. Their tolerance to misalignment and torsional shock is unequalled in non-specialized units. All Marley driveshafts are dynamically balanced at the factory to minimize operating vibrations.

Welded unitized hot dip galvanized steel supports maintain alignment throughout the mechanical equipment system. Marley torque-tubes provide superior strength and stability. Their cylindrical shape also keeps operating costs down by minimizing airflow restrictions and reducing air turbulence in the fan entrance region.

■Water Distribution System

The gravity-flow water distribution system designed into the Class 160 tower essentially reduces pump head to its most basic component—static lift—saving you money on pump power. You won’t have to force water through internal piping and pressure spray nozzles, as you would in a counterflow tower.

Warm water enters the system through a Marley galvanized crossover pipe. Inlet connections for your piping are drilled to conform to Class 125 ANSI requirements. Marley flow-control valves balance the flow to both distribution basins of each cell. Water flows from the valves through a splash-suppression chamber and into the treated fir plywood distribution basins.

Polypropylene Marley “Spiral Target” nozzles in the basin

floor then distribute the water uniformly over the fill.

All materials in the water distribution system offer long life and minimal maintenance. Valves consist of cast iron bodies and grease-lubricated stainless steel operating stems. All plywood is treated exterior grade. The nozzles are chemically and biologically inert, so they’ll last indefinitely.

■Structure and Materials

Class 160 tower design conforms to the latest edition of the National Design Specification for Wood Construction (NDS) published by the National Forest Products Association, as well as CTI standards STD-114 and STD-103. Wind load criterion is normally 30 pounds per square foot of projected area and the design meets criteria for UBC Zone 1 seismic loading, based on a maximum water temperature of 120°F.

160 specifications

SPX Cooling Technologies 160 is a prominent cooling tower option designed for a range of industrial and commercial applications. This advanced system reflects a commitment to efficiency, performance, and adaptability, making it a leading choice for organizations looking to optimize their cooling processes.

One of the standout features of the SPX Cooling Technologies 160 is its modular design. This allows for flexibility in installation and scalability based on specific cooling requirements. Whether you need a single unit or multiple towers, the modularity ensures that the system can be configured to meet the unique demands of various projects.

The cooling tower employs advanced materials that enhance durability and resistance to corrosion, extending the lifespan of the system. This is crucial for industrial environments where exposure to harsh conditions is common. The design focuses on energy efficiency as well, incorporating fan and motor technology that reduces power consumption while maximizing airflow and cooling performance.

Another significant characteristic of the SPX 160 is its advanced thermal performance. With a well-designed heat transfer surface, the cooling tower operates efficiently, ensuring optimal heat exchange between the water and the air. This process effectively reduces water temperatures, leading to significant energy savings and improved operational efficiency.

The unit is equipped with state-of-the-art controls that enhance its functionality. These smart control systems allow for precise regulation of cooling operations, optimizing performance based on real-time needs. This not only boosts efficiency but also supports maintenance schedules, aiding in the longevity of the equipment.

Furthermore, the SPX Cooling Technologies 160 is designed with environmental considerations in mind. It features low-noise operation, which is essential for installations in noise-sensitive areas. Additionally, the cooling tower can be customized with options that minimize water usage, aligning with sustainability goals many organizations prioritize today.

Overall, the SPX Cooling Technologies 160 stands out in the market for its combination of adaptability, efficiency, and innovation. Its design and features make it a compelling solution for businesses in need of reliable cooling solutions, ultimately contributing to improved operational performance and sustainability. Whether for industrial plants, commercial buildings, or unique applications, the SPX 160 is a credible option in the cooling technology landscape.