8.If it is necessary to replace the display bezel or any of the display assembly internal components:
a.Remove the two rubber screw covers (1) and the two Phillips 2.0×5.0 screws (2) that secure the display bezel to the display assembly.
b.Flex the inside edges of the top (1), the left and right sides (2), and the bottom (3) of the display bezel until the bezel disengages from the display enclosure.
c.Remove the display bezel (4).
9.Remove the six screws Phillips 2.0×3.0 screws (1) on top that secure the display panel to the display enclosure.
Component replacement procedures | 59 |