Related topics
Getting started
Logging out
Logging out
Log out of the HP Version Control Repository Manager (HP VCRM) to prevent someone from accessing your active session if you walk away.
To log out of the GUI:
1.Click the VCRMSystem Home page link in the HP SMH page.
2.Click Sign out on the HP SMH page.
3.Close the Web browser.
Related topics
Logging in
About software repositories
The practice of updating HP Service Pack for ProLiant , and Components from a single or multiple repositories saves time and is key to standardizing software maintenance and update procedures on distributed systems.
NOTE: Default installation of an HP Version Control Repository Manager (HP VCRM) can manage only the repository that is located on the server on which HP VCRM is installed.
For maximum manageability and flexibility across operating system platforms, each repository that is created should be:
•Located on a local drive with write access
•Updated automatically by the HP VCRM
•Managed by HP VCRM
Related procedures
Configuring auto update
Creating a custom software baseline
Related topics
Home
Catalog
Log
Updating the repository
Configuring the repository using HP VCRM CLI
Configuring the repository using HP VCRM CLI
This section describes procedures that you can use to configure the repository using the HP VCRM CLI. The topics discussed in this section are:
•Displaying the current HP VCRM settings
•HP Service Pack for ProLiant, ProLiant and Integrity Support Packs.
•Changing the repository folder
•Initializing the update from the web
•Configuring automatic update for HP VCRM
8Getting started