7.Remove the optical drive (3).
Reverse this procedure to install the optical drive.
Hard drive
NOTE: The hard drive spare part kit does not include the hard drive bracket, hard drive connector cable, and screws. These components are included in the Hard Drive Hardware Kit, spare part number
Description | Spare part number | |
|
| |
1 TB, 5400 rpm, 9.5 mm | ||
|
|
|
750 | GB, 5400 rpm, 9.5 mm | |
|
|
|
640 | GB, 5400 rpm, 9.5 mm (supported for use on computer models equipped with Intel | |
processors and supported for use on computer models equipped with AMD processors with |
| |
Windows 8.0) |
| |
|
|
|
500 | GB, 5400 rpm, 7.0 mm | |
|
|
|
Before removing the hard drive, follow these steps:
1.Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.
2.Disconnect the power from the computer by unplugging the power cord from the computer.
3.Disconnect all external devices from the computer.
4.Remove the battery (see Battery on page 47).
5.Remove the service cover (see Optical drive on page 48).
Component replacement procedures 49