HP 17-e020us E0J81UAABA, 17 E0J83UAABA, 17 E0J92UAABA, 17 E0J75UA manual Power button board

Power button board

Description	Spare part number
Power button board (includes cable)
For use only with HP Pavilion 17 Notebook computer models	720673-001
For use only with HP Pavilion 17 TouchSmart Notebook computer models	749969-001

Before removing the power button board, follow these steps:

1.Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.

2.Disconnect the power from the computer by unplugging the power cord from the computer.

3.Disconnect all external devices from the computer.

4.Remove the battery (see Battery on page 47), and then remove the following components:

a.Optical drive (see Optical drive on page 48)

b.Hard drive (see Hard drive on page 49)

c.Keyboard (see Keyboard on page 56)

d.Top cover (see Top cover on page 60)

Remove the power button board:

1.Turn the top cover upside down, with the front toward you.

2.Remove the Phillips PM2.5×3.0 screw (1) that secures the power button board to the top cover.

3.Release the clips (2) that secure the power button board to the top cover.

4.Remove the power button board (3) and cable.

Reverse this procedure to install the power button board.

Component replacement procedures 63