HP 17 E0J83UAABA, 17 E0J92UAABA, 17 E0J75UA manual Top cover, Description Spare part number

Top cover

NOTE: The top cover spare part kit includes the TouchPad.

Description	Spare part number
In flyer red finish for use on all computer models	720681-001
In goji berry finish for use on all computer models	748414-001
In hazel berry finish for use on all computer models	748413-001
In mineral black finish for use on all computer models	733516-001
In pearl white finish for use on all computer models	720680-001
In regal purple finish for use on all computer models	720683-001
In revolutionary blue finish for use on all computer models	720682-001
In sparkling black and silver finish for use on all computer models	720684-001

Before removing the top cover, follow these steps:

1.Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.

2.Disconnect the power from the computer by unplugging the power cord from the computer.

3.Disconnect all external devices from the computer.

4.Remove the battery (see Battery on page 47), and then remove the following components:

a.Optical drive (see Optical drive on page 48)

b.Hard drive (see Hard drive on page 49)

c.Keyboard (see Keyboard on page 56)

NOTE: When replacing the top cover, be sure to remove the following components from the defective top cover and install them on the replacement top cover:

●Power button board (see Power button board on page 63)

●TouchPad button board (see TouchPad button board on page 64) Remove the top cover:

1.Close the computer.

2.Turn the computer upside down with the front toward you.

60 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts