PCH heat sink
Description | Spare part number |
|
|
PCH heat sink |
|
|
|
IMPORTANT: Make special note of each screw and screw lock size and location during removal and replacement.
Before removing the PCH heat sink, follow these steps:
1.Shut down the computer.
2.Disconnect all external devices connected to the computer.
3.Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer.
4.Remove the battery (see Battery on page 35).
5.Remove the keyboard (see Keyboard on page 39).
6.Remove the top cover (see Top cover on page 43).
7.Remove the hard drive (see Hard drive on page 47).
8.Remove the USB board (see USB board/audio jack on page 50).
9.Remove the WLAN (see WLAN module on page 51).
10.Remove the system board (see System board on page 54).
Remove the PCH heat sink:
1.Turn the system board upside down, with the front toward you.
2.Remove the two Phillips screws (1) and lift off the PCH heat sink (2).
Reverse this procedure to install the PCH heat sink onto a replacement system board.
Component replacement procedures 65