NFC board
Description | Spare part number |
|
|
NFC board (includes NFC board cable) | |
|
|
Before removing the NFC board, follow these steps:
1.Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.
2.Disconnect the power from the computer by unplugging the power cord from the computer.
3.Disconnect all external devices from the computer.
4.Remove the battery (see Battery on page 33).
5.Remove the service cover (see Service cover on page 34).
Remove the NFC board:
1.Disconnect the NFC antenna cable (1) from the NFC board.
The NFC antenna cable is included in the bottom cover spare part kit, spare part number .
2.Release the zero insertion force (ZIF) connector (2) to which the NFC board cable is attached, and then disconnect the NFC board cable from the system board.
3.Detach the NFC board cable (3) from the bottom cover. (The NFC board cable is attached to the bottom cover with
4.Remove the Phillips PM1.5×2.0 screw (4) that secures the NFC board to the bottom cover.
5.Remove the NFC board (5) and cable.
Component replacement procedures | 43 |