Hard drive
NOTE: The hard drive spare part kit does not include the hard drive bracket, hard drive connector adapter, or screws.
Description | Spare part number |
|
|
|
|
|
|
|
|
|
|
Hard Drive Hardware Kit (includes the hard drive bracket, hard drive connector adapter, and | |
screws) |
|
|
|
Before removing the hard drive, follow these steps:
1.Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.
2.Disconnect the power from the computer by unplugging the power cord from the computer.
3.Disconnect all external devices from the computer.
4.Remove the battery (see Battery on page 45).
5.Remove the service cover (see Service cover on page 47).
Remove the hard drive:
1.Loosen the four Phillips PM2.0×5.5 screws (1) that secure the hard drive to the computer.
48 | Chapter 4 Removal and replacement procedures |