Page 156
Considering boot order changes
Before changing the boot order, note the following considerations:
●When the computer restarts after the boot order has been changed, the computer attempts to start using the new boot order.
●If there is more than one type of boot device, the computer attempts to boot using the first of each type of boot device (except for optical devices). For example, if the computer is connected to an optional docking device (select models only) that contains a hard drive, this hard drive will be shown in the boot order as a USB hard drive. If the system attempts to boot from this USB hard drive and fails, it will not attempt to boot to the hard drive in the hard drive bay. Instead, it will try to boot to the next type of device in the boot order. However, if there are 2 optical devices, and the first optical device does not boot (either because it does not contain media or the media is not a boot disc), the system will try to boot to the second optical device.
●Changing the boot order also changes the logical drive designations. For example, if you start up from a CD-ROM drive with a disc formatted as drive C, that CD-ROM drive becomes drive C and the hard drive in the hard drive bay becomes drive D.
●The computer will boot from a NIC device only if the device has been enabled in the Built-In Device Options menu of Computer Setup and if booting from the device has been enabled in the Boot Options menu of Computer Setup. Booting from a NIC does not affect logical drive designations because no drive letter is associated with the NIC.
●Drives in an optional docking device (select models only) are treated like external USB devices in the boot order.
144 Chapter 14 MultiBoot
Contents
HP EliteBook
Product notice
Safety warning notice
Iv Safety warning notice
Table of contents
Pointing devices and keyboard
Adjusting the volume
Power management
Drives
Security
151
Xii
Features
Identifying hardware
Top components
Pointing devices
Lights
Component Description
Rapidly
Buttons, switches, and fingerprint reader
Panel System and Security Power Options
Keys
Front components
Fn key
Rear components
Right-side components
Left-side components
Bottom components
Display components
Wireless antennas select models only
Identifying the labels
Additional hardware components
Page
Wireless, modem, and local area network
Using wireless devices select models only
Identifying wireless and network icons
Using the wireless controls
Using the wireless button
Using Wireless Assistant software select models only
Using HP Connection Manager select models only
Using operating system controls
Using a Wlan device select models only
Setting up a Wlan
Protecting your Wlan
Connecting to a Wlan
Use a wireless transmitter with built-in security
Roaming to another network
Using HP Mobile Broadband select models only
Inserting a SIM select models only
Removing a SIM select models only
Page
Using a Bluetooth wireless device select models only
Bluetooth and Internet Connection Sharing ICS
Troubleshooting wireless connection problems
Cannot create a Wlan connection
Cannot connect to a preferred network
Network icon is not displayed
Current network security codes are unavailable
Cannot connect to the wireless router
Wlan connection is very weak
Using the modem select models only
Connecting a modem cable purchased separately
Selecting a location setting
Adding new locations when traveling
Viewing the current location selection
Solving travel connection problems
Select Start Devices and Printers
Click Properties
Connecting to a local area network LAN
Using pointing devices
Using the keyboard
Pointing devices and keyboard
Displaying system information
Initiating Sleep
Switching the screen image
Viewing battery charge information
Decreasing screen brightness
Increasing screen brightness
Using HP QuickLook
Using keypads
Using the embedded numeric keypad
Using an optional external numeric keypad
Switching key functions on the embedded numeric keypad
Enabling and disabling the embedded numeric keypad
Cleaning the TouchPad, keyboard, and vents
Multimedia features
Adjusting the volume
Multimedia
Multimedia software
Click Customize notification icons
Accessing your preinstalled multimedia software
Installing multimedia software from a disc
Connecting external audio devices
Audio
Checking your audio functions
Page
Connecting an external monitor or projector
Using the external monitor port
Using the DisplayPort
Video
Page
Using optical discs CDs, DVDs, and BDs
Optical drive select models only
Identifying the optical drive
Selecting the right disc CDs, DVDs, and BDs
CD-R discs
CD-RW discs
DVD±R discs
Playing a CD, DVD, or BD
DVD±RW discs
LightScribe DVD+R discs
Blu-ray Discs BDs
Configuring AutoPlay
Changing DVD region settings
Observing the copyright warning
Copying a CD, DVD, or BD
Creating burning a CD, DVD, or BD
Removing an optical disc CD, DVD, or BD
Troubleshooting
Computer does not detect the optical drive
Disc does not play
Disc does not play automatically
Movie stops, skips, or plays erratically
Movie is not visible on an external display
Device driver must be reinstalled
Obtaining the latest HP device drivers
Adjusting webcam properties
Webcam select models only
Capturing business card images
Page
Power management
Setting power options
Using power-saving states
Initiating and exiting Sleep
Using the battery meter
Using power plans
Initiating and exiting Hibernation
Setting password protection on wakeup
Viewing the current power plan
Selecting a different power plan
Customizing power plans
Using Power Assistant select models only
Using external AC power
Starting Power Assistant
Using battery power
Connecting the AC adapter
Finding battery information in Help and Support
Using Battery Check
Displaying the remaining battery charge
Inserting or removing the battery
Charging a battery
Maximizing battery discharge time
Managing low battery levels
Identifying low battery levels
Resolving a low battery level
Calibrating a battery
Fully charge the battery
Disable Hibernation and Sleep
Discharge the battery
Fully recharge the battery
Reenable Hibernation and Sleep
Conserving battery power
Storing a battery
Disposing of a used battery
Replacing the battery
Power management
Testing an AC adapter
Shutting down the computer
Page
Identifying installed drives
Drives
Handling drives
Page
Using Disk Defragmenter
Using Disk Cleanup
Improving hard drive performance
Using HP 3D DriveGuard
Identifying HP 3D DriveGuard status
Using HP 3D DriveGuard software
Replacing a hard drive in the hard drive bay
Page
Page
Replacing a drive in the upgrade bay
Removing the protective insert
Replacing a hard drive
Page
Page
Replacing an optical drive
Page
Page
Using a USB device
Connecting a USB device
External devices
Using USB legacy support
Removing a USB device
Using a 1394 device
Connecting a 1394 device
Removing a 1394 device
Page
Using external drives
Using optional external devices
Using a docking device
Using SD Card Reader cards
External media cards
Inserting a digital card
Using ExpressCards select models only
Configuring an ExpressCard
Removing a digital card
Inserting an ExpressCard
Removing an ExpressCard
Using smart cards select models only
Inserting a smart card
Removing a smart card
Memory modules
Page
Page
Page
Upgrading a memory module in the primary memory module slot
Page
Page
Page
Security
Protecting the computer
Using passwords
Setting passwords in Windows
Setting passwords in Computer Setup
Bios administrator password
Managing a Bios administrator password
Using Computer Setup DriveLock
Entering a Bios administrator password
Setting a DriveLock password
Entering a DriveLock password
Changing a DriveLock password
Removing DriveLock protection
Using Computer Setup Auto DriveLock
Entering an Automatic DriveLock password
Removing Automatic DriveLock protection
Using Computer Setup security features
Viewing Computer Setup System Information
Securing system devices
Using Computer Setup System IDs
Using antivirus software
Using firewall software
Installing critical updates
Using HP ProtectTools Security Manager select models only
Installing a security cable
Software updates
Updating software
Updating the Bios
Determining the Bios version
Downloading a Bios update
Page
Updating programs and drivers
Click Download
Using SoftPaq Download Manager
Backup and recovery
Select Start All Programs Maintenance Backup and Restore
Backing up your information
Backup and recovery
Performing a recovery
Using the Windows recovery tools
Using f11 recovery tools
Using a Windows 7 operating system DVD purchased separately
Select Repair your computer
Computer Setup
Starting Computer Setup
Using Computer Setup
Navigating and selecting in Computer Setup
Computer Setup menus
Restoring factory settings in Computer Setup
File menu
Security menu
System Configuration menu
User Management requires a Bios administrator password
USB port to the computer
Enable/disable Preboot Authentication on HP QuickLook
Ansi
MultiBoot
About the boot device order
Enabling boot devices in Computer Setup
Considering boot order changes
Choosing MultiBoot preferences
Setting a new boot order in Computer Setup
Dynamically choosing a boot device
Setting a MultiBoot Express prompt
Entering MultiBoot Express preferences
Management and printing
Using Client Management Solutions
Configuring and deploying a software image
Managing and updating software
HP Client Automation select models only
HP SSM System Software Manager
Using the HP Universal Print Driver
Symbols/Numerics
Index
DVD-ROM
Jacks
Ssid
Wireless Assistant