Inserting or removing the battery
NOTE: For additional information on using the battery, refer to the HP Notebook Reference Guide.
To insert the battery:
1.Turn the computer upside down on a flat surface, with the battery bay toward you.
2.Align the battery (1) with the outer edge of the battery bay.
3.Rotate the battery (2) into the battery bay until it is seated. The battery release latch automatically locks the battery into place.
To remove the battery:
CAUTION: Removing a battery that is the sole power source for the computer can cause loss of information. To prevent loss of information, save your work and initiate Hibernation or shut down the computer through Windows before removing the battery.
1.Turn the computer upside down on a flat surface.
2.Slide the battery release latch (1) to release the battery.
NOTE: The battery release latch automatically returns to its original position.
30 Chapter 5 Maintenance