HP Dv6 6108Us manual Restore, Creating restore media

Page 47

Restore

In the event of hard drive failure, to restore your system to its factory image you will need a set of recovery discs or a recovery flash drive that you can create using HP Recovery Manager. HP recommends that you use this software to create either a set of recovery discs or a recovery flash drive immediately after software setup.

If for some other reason you need to restore your system, this can be achieved using the HP Recovery partition (select models only), without the need for recovery discs or a recovery flash drive. To check for the presence of a recovery partition, click Start, right-click Computer, click Manage, and then click Disk Management. If the recovery partition is present, a Recovery drive is listed in the window.

CAUTION: HP Recovery Manager (partition or discs/flash drive) restores only software that was preinstalled at the factory. Software not provided with this computer must be reinstalled manually.

NOTE: Recovery discs have been included if your computer does not have a recovery partition.

Creating restore media

HP recommends that you create either a set of recovery discs or a recovery flash drive to be sure that you can restore your computer to its original factory state if the hard drive fails, or if for any reason you cannot restore using the recovery partition tools. Create these discs or the flash drive after setting up the computer for the first time.

NOTE: HP Recovery Manager allows the creation of only one set of recovery discs or one recovery flash drive. Handle these discs or the flash drive carefully and keep them in a safe place.

NOTE: If your computer does not include an integrated optical drive, you can use an optional external optical drive (purchased separately) to create recovery discs, or you can purchase recovery discs for your computer from the HP Web site. If you use an external optical drive, it must be connected directly to a USB port on the computer, not to a USB port on an external device, such as a USB hub.

Guidelines:

●Purchase high-quality DVD-R, DVD+R, DVD-R DL, or DVD+R DL discs.

NOTE: Read-write discs, such as CD-RW, DVD±RW, double-layer DVD±RW, and BD-RE (rewritable Blu-ray) discs, are not compatible with the HP Recovery Manager software.

●The computer must be connected to AC power during this process.

●Only one set of recovery discs or one recovery flash drive can be created per computer.

NOTE: If you are creating recovery discs, number each disc before inserting it into the optical drive.

●If necessary, you can exit the program before you have finished creating the recovery discs or recovery flash drive. The next time you open HP Recovery Manager, you will be prompted to continue the backup creation process.

To create a set of recovery discs or a recovery flash drive:

1.Select Start > All Programs > HP > HP Recovery Manager > HP Recovery Media Creation.

2.Follow the on-screen instructions.

Restore 39

Page 46 Page 48
Image 47
Page 46 Page 48
Contents Getting Started Software terms Product noticeSafety warning notice Iv Safety warning notice Table of contents Contacting customer support Labels Vii Viii Whats new? Finding information WelcomeIconDescription Whats new?Beats Audio select models only Select Start All Programs HP HP Documentation Finding informationLimited Warranty Getting to know your computer Component Description TopTouchPad Lights Buttons, speakers, and fingerprint reader select models only Beats Audio KeysSelect Start Control Panel Hardware and Sound Front Guide Right sideLeft side YouCam CyberLink YouCam DisplayRear Bottom Networking Connecting to a wireless network Using an Internet service provider ISPConnecting to an existing Wlan Setting up a new Wlan network Configuring a wireless router Keyboard and pointing devices Icon Key Description Using the keyboardUsing the action keys Function Hotkey Description Using the hotkeysAudio Using the keypadSelect Start Control Panel Hardware and Sound Beats Using the TouchPad Using pointing devicesSetting pointing device preferences Turning the TouchPad off and on Selecting Scrolling Maintenance Inserting or removing the battery Removing the hard drive Replacing or upgrading the hard drivePage Installing a hard drive Page Adding or replacing memory modules Page Page Backup and recovery Creating restore media RestorePerforming a system restore Changing the computer boot order Restoring using the restore mediaBacking up and recovering your information Using Windows Backup and Restore When to create restore points Using Windows system restore pointsCustomer support Contacting customer support Component LabelsSpecifications Input power Rating Input powerDC plug of external HP power supply Operating environment Index Wlan
Top Page Image Contents