HP 410C manual 01556-1

TM 11-6625-1614-15

Section II

Paragraph 2-14to 2-15

DO NOT CHANGE THE SETTING OF THE LINE VOLTAGE SWITCH WHEN THE VOLT- METER IS OPERATING.

2-14. REPACKAGING FOR SHIPMENT.

2-15. The following paragraphs contain a general guide for repackaging of the instrument for shipment. Refer to Paragraph 2-16if the original container is to be used: 2-17 if it is not.

2-16. If the original container is to be used, proceed as follows:

a. Place instrument in original container if avai- lable.

b. Ensure that container is well sealed with strong tape or metal bands.

2-17. If original container is not to be used, proceed as follows:

a.	Wrap instrument in	heavy paper or plastic
before	placing in an inner	container.

b. Place packing material around all sides of instrument and protect panel face with cardboard strips.

Model 410C

Figure 2-4. Two Half Modules in Rack Adapter

c. Place instrument and inner container in a heavy carton or wooden box and seal with strong tape or metal bands.

d . Mark shipping container with "DELICATE INSTRUMENT”, “FRAGILE”, etc.

2-2 01556-1