Toshiba H6A-HLS, HV6CS-MLD Installation, Mounting the Drawout Cell, Mounting in the panel

Page 19

3. Installation

Make sure the location satisfied the requirements listed under Storage and Installation Location (page 3) and check the dimensions using the diagrams in other catalogs or external view diagrams and panel cut diagram. Prior to installation, the maximum fault current capacity of the power system at the point of installation should be verified. This value must not exceed the symmetrical interrupting capability of the circuit breaker. See typical circuit breaker nameplate below.

DANGER

Do not exceed the ratings specified on the breaker nameplate or system accessories. Underrated equipment can fail during operation causing fire, explosion, severe injury, death, and property damage.

Typical Circuit Breaker Nameplate

3.1Mounting the Drawout Cell

3.1.1Mounting in the panel

To install the draw-out unit, perform the steps shown in Figures 4 and 5 in that order.

Figure 4 Fasten the drawout cell to the panel with the 4 hexagonal bolts (M8). Tightening torque should be 11.8 to 14.7 N-m (120 to 150 kgf-cm).

- 13 -

Figure 5 Crimp the crimp-on terminal provided with the unit to the grounding wire and use the hexagonal bolt (M8) to fasten it in place. The tightening torque should be 11.8 to 14.7 N-m (120 to 150 kgf -cm).

Page 18 Page 20
Image 19
Page 18 Page 20
Contents HV6CS-MLD Page Important Notice About This Manual Contacting TIC’s Customer Support Center Table of Contents Safety Alert Symbol General Safety InformationEquipment Warning Labels Equipment Inspection Operating the VCB Connecting and disconnecting the main circuitDuring Use Installation locationSpecial environmental conditions Applicable standards pertaining to switching surges Drawout Type Circuit Breaker Part NamesReceipt and Unpacking From Receipt to StorageHoisting the Circuit Breaker TransportLifting the Drawout Cell Drawout CellStorage Mounting the Drawout Cell InstallationMounting in the panel Place the VCB on the lifter Location of VCB holding pin with chain For Motorized Spring-operated VCBs OperationManual Operation Closing the CircuitWhen the spring is taut Perform the step shown in Figure Opening the Circuit Electrical Operation Motorized Operation Control CircuitUndervoltage Trip Plug Installed in UV Trip DevicePage Maintenance Record Maintenance/InspectionsTypes of Maintenance and Inspection Work During Maintenance/InspectionsInspection Frequency Periodic Inspection Checkpoints Location Inspection Criteria Disposition Remarks Method Vacuum CheckPrecautions Test Procedure Dielectric Breakdown Characteristics Page Page Toshiba

H6A-HLS, HV6CS-MLD specifications

The Toshiba HV6CS-MLD and H6A-HLS are advanced models designed to address the needs of modern electronic applications, focusing on efficiency, reliability, and innovative technology. These units are part of Toshiba’s commitment to delivering high-performance solutions.

The HV6CS-MLD is notable for its high efficiency and low power consumption. This model is engineered to provide optimal performance while minimizing operational costs, making it an excellent choice for consumers seeking energy-efficient solutions. Its advanced power management features enable it to operate effectively under a wide range of conditions, ensuring stable performance and longevity.

Key characteristics of the HV6CS-MLD include a robust thermal design that enhances heat dissipation, contributing to a longer lifespan and improved reliability. The unit employs Toshiba’s proprietary thermal technologies to maintain optimal operational temperatures, which is crucial for high-performance applications. Additionally, it features advanced fault protection mechanisms that safeguard against overcurrent and overheating, offering peace of mind to users.

On the other hand, the H6A-HLS model is designed with versatility in mind, catering to a broad spectrum of applications. It integrates cutting-edge semiconductor technologies, providing high-speed switching capabilities. This model is renowned for its compact design, allowing for easy integration into various systems without taking up excessive space.

One of the standout features of the H6A-HLS is its superior noise reduction technology, which significantly improves signal quality. This makes it particularly appealing for audio and communication applications where clarity and precision are paramount. Furthermore, the H6A-HLS is built to withstand harsh environments, featuring durable materials and designs that enhance its resilience and performance under extreme conditions.

Both models utilize Toshiba’s industry-leading manufacturing processes, ensuring high quality and reliability. Moreover, these products are backed by Toshiba’s extensive research and development efforts, which continuously push the boundaries of technology.

In summary, the Toshiba HV6CS-MLD and H6A-HLS are exemplary products that exemplify Toshiba's dedication to innovation, efficiency, and durability. Their unique features and advanced technologies make them suitable for a wide range of applications, providing end-users with reliable and high-performance solutions. As industries evolve, Toshiba remains at the forefront, delivering products that meet the challenges of tomorrow.
Top Page Image Contents