Toshiba H6A-HLS, HV6CS-MLD operation manual Precautions

Page 33

Toshiba offers a compact vacuum checker (Type CI35-1D, see Figure 22) which enables a quick and easy check on vacuum interrupter internal pressure. Alternatively, any commercially available AC high potential tester may be used which is capable of delivering at least 25 milliamperes at 22 kV for a period of one minute.

Figure 22 Toshiba Portable Vacuum Checker

PRECAUTIONS:

Applying abnormally high voltage across a pair of contacts in vacuum may produce X-rays. The radiation may increase with the increase in voltage and/or decrease in contact spacing. X-radiation produced during this test with recommended voltage and normal contact spacing is extremely low and well below the maximum permitted by standards. As an additional safety measure, it is recommended that all personnel keep at least 1 meter (3.3 ft) away from the vacuum circuit breaker while this test is performed.

WARNING

WARNING

Radiation exposure hazard. X-rays may cause illness or injury. Stay at least 1 meter (3.3 ft) away from the circuit breaker during the vacuum check test .

Hazardous voltages are present during dielectric testing which can result in severe injury or death. Only qualified personnel should conduct this testing.

See Figure 23 for sample withstand voltage test circuit.

Figure 23 Sample Withstand Voltage Test Circuit

- 27 -

Page 32 Page 34
Image 33
Page 32 Page 34
Contents HV6CS-MLD Page Important Notice About This Manual Contacting TIC’s Customer Support Center Table of Contents Safety Alert Symbol General Safety InformationEquipment Warning Labels Equipment Inspection Operating the VCB Connecting and disconnecting the main circuitDuring Use Installation locationSpecial environmental conditions Applicable standards pertaining to switching surges Drawout Type Circuit Breaker Part NamesReceipt and Unpacking From Receipt to StorageHoisting the Circuit Breaker TransportLifting the Drawout Cell Drawout CellStorage Installation Mounting the Drawout CellMounting in the panel Place the VCB on the lifter Location of VCB holding pin with chain Manual Operation OperationClosing the Circuit For Motorized Spring-operated VCBsWhen the spring is taut Perform the step shown in Figure Opening the Circuit Electrical Operation Motorized Operation Control CircuitUndervoltage Trip Plug Installed in UV Trip DevicePage Maintenance Record Maintenance/InspectionsDuring Maintenance/Inspections Types of Maintenance and Inspection WorkInspection Frequency Periodic Inspection Checkpoints Location Inspection Criteria Disposition Remarks Method Vacuum CheckPrecautions Test Procedure Dielectric Breakdown Characteristics Page Page Toshiba

H6A-HLS, HV6CS-MLD specifications

The Toshiba HV6CS-MLD and H6A-HLS are advanced models designed to address the needs of modern electronic applications, focusing on efficiency, reliability, and innovative technology. These units are part of Toshiba’s commitment to delivering high-performance solutions.

The HV6CS-MLD is notable for its high efficiency and low power consumption. This model is engineered to provide optimal performance while minimizing operational costs, making it an excellent choice for consumers seeking energy-efficient solutions. Its advanced power management features enable it to operate effectively under a wide range of conditions, ensuring stable performance and longevity.

Key characteristics of the HV6CS-MLD include a robust thermal design that enhances heat dissipation, contributing to a longer lifespan and improved reliability. The unit employs Toshiba’s proprietary thermal technologies to maintain optimal operational temperatures, which is crucial for high-performance applications. Additionally, it features advanced fault protection mechanisms that safeguard against overcurrent and overheating, offering peace of mind to users.

On the other hand, the H6A-HLS model is designed with versatility in mind, catering to a broad spectrum of applications. It integrates cutting-edge semiconductor technologies, providing high-speed switching capabilities. This model is renowned for its compact design, allowing for easy integration into various systems without taking up excessive space.

One of the standout features of the H6A-HLS is its superior noise reduction technology, which significantly improves signal quality. This makes it particularly appealing for audio and communication applications where clarity and precision are paramount. Furthermore, the H6A-HLS is built to withstand harsh environments, featuring durable materials and designs that enhance its resilience and performance under extreme conditions.

Both models utilize Toshiba’s industry-leading manufacturing processes, ensuring high quality and reliability. Moreover, these products are backed by Toshiba’s extensive research and development efforts, which continuously push the boundaries of technology.

In summary, the Toshiba HV6CS-MLD and H6A-HLS are exemplary products that exemplify Toshiba's dedication to innovation, efficiency, and durability. Their unique features and advanced technologies make them suitable for a wide range of applications, providing end-users with reliable and high-performance solutions. As industries evolve, Toshiba remains at the forefront, delivering products that meet the challenges of tomorrow.
Top Page Image Contents