Toshiba HV6CS-MLD, H6A-HLS operation manual Place the VCB on the lifter

Page 20

Screw

Tightening

Screw

Tightening torque

nominal dia.

torque

Nominal dia.

 

M4

1.47 to 1.96 N-m

M8

11.8 to 14.7 N-m

 

(15 to 20 kgf-cm)

 

(120 to 150 kgf-cm)

M5

2.94 to 3.92 N-m

M10

M10 24.5 to 30.9 N-m

 

(30 to 40 kgf-cm)

 

(250 to 315 kgf-cm)

M6

4.90 to 6.37 N-m

M12

44.1 to 55.4 N-m

 

(50 to 65 kgf-cm)

 

(450 to 565 kgf-cm)

Table 5 Tightening Torque

3.2 Inserting the VCB into the Cell

(Outside the cell → disconnected position)

Perform the steps shown in Figures 6 through 10 in that order.

.

Figure 6 Open the B9 grease provided with the unit and apply it to the ends of the six contacts.

Figure 7 Place the VCB on the lifter.

Figure 8 Align the hole on the lifter with the lifter pin on the cubicle and remove the VCB holding pin on the draw-out unit side.

- 14 -

Figure 9 Hold the handle with both hands and, with the interlock lever in the raised position, insert the VCB into the panel.

Page 19 Page 21
Image 20
Page 19 Page 21
Contents HV6CS-MLD Page Important Notice About This Manual Contacting TIC’s Customer Support Center Table of Contents General Safety Information Safety Alert SymbolEquipment Warning Labels Equipment Inspection Connecting and disconnecting the main circuit Operating the VCBInstallation location During UseSpecial environmental conditions Applicable standards pertaining to switching surges Part Names Drawout Type Circuit BreakerFrom Receipt to Storage Receipt and UnpackingTransport Hoisting the Circuit BreakerDrawout Cell Lifting the Drawout CellStorage Mounting in the panel InstallationMounting the Drawout Cell Place the VCB on the lifter Location of VCB holding pin with chain Operation Manual OperationClosing the Circuit For Motorized Spring-operated VCBsWhen the spring is taut Perform the step shown in Figure Opening the Circuit Electrical Operation Control Circuit Motorized OperationPlug Installed in UV Trip Device Undervoltage TripPage Maintenance/Inspections Maintenance RecordInspection Frequency During Maintenance/InspectionsTypes of Maintenance and Inspection Work Periodic Inspection Checkpoints Vacuum Check Location Inspection Criteria Disposition Remarks MethodPrecautions Test Procedure Dielectric Breakdown Characteristics Page Page Toshiba

H6A-HLS, HV6CS-MLD specifications

The Toshiba HV6CS-MLD and H6A-HLS are advanced models designed to address the needs of modern electronic applications, focusing on efficiency, reliability, and innovative technology. These units are part of Toshiba’s commitment to delivering high-performance solutions.

The HV6CS-MLD is notable for its high efficiency and low power consumption. This model is engineered to provide optimal performance while minimizing operational costs, making it an excellent choice for consumers seeking energy-efficient solutions. Its advanced power management features enable it to operate effectively under a wide range of conditions, ensuring stable performance and longevity.

Key characteristics of the HV6CS-MLD include a robust thermal design that enhances heat dissipation, contributing to a longer lifespan and improved reliability. The unit employs Toshiba’s proprietary thermal technologies to maintain optimal operational temperatures, which is crucial for high-performance applications. Additionally, it features advanced fault protection mechanisms that safeguard against overcurrent and overheating, offering peace of mind to users.

On the other hand, the H6A-HLS model is designed with versatility in mind, catering to a broad spectrum of applications. It integrates cutting-edge semiconductor technologies, providing high-speed switching capabilities. This model is renowned for its compact design, allowing for easy integration into various systems without taking up excessive space.

One of the standout features of the H6A-HLS is its superior noise reduction technology, which significantly improves signal quality. This makes it particularly appealing for audio and communication applications where clarity and precision are paramount. Furthermore, the H6A-HLS is built to withstand harsh environments, featuring durable materials and designs that enhance its resilience and performance under extreme conditions.

Both models utilize Toshiba’s industry-leading manufacturing processes, ensuring high quality and reliability. Moreover, these products are backed by Toshiba’s extensive research and development efforts, which continuously push the boundaries of technology.

In summary, the Toshiba HV6CS-MLD and H6A-HLS are exemplary products that exemplify Toshiba's dedication to innovation, efficiency, and durability. Their unique features and advanced technologies make them suitable for a wide range of applications, providing end-users with reliable and high-performance solutions. As industries evolve, Toshiba remains at the forefront, delivering products that meet the challenges of tomorrow.
Top Page Image Contents