1With the Battery/Memory card door open, insert the memory card in the small slot below the batteries, with the notched side of the card going in first, as shown. The card only fits one way; do not force it. Make sure the memory card snaps into place.
2Close the Battery/Memory card door by pushing the door down and sliding the door toward the top of the camera until the door latches.
To remove the memory card from the
camera, first turn the camera off. Then open the Battery/ Memory card door, press down on the top edge of the memory card, and it will spring outward from the slot.
Turning on Power
Turn the camera on by sliding the 
ON/OFF switch to the right and then releasing it.
The lens extends and the Power light to the left of the 
ON/ OFF switch turns on solid green. The HP logo also displays on the Image Display as the camera powers up.
12 | HP Photosmart M407 User’s Manual |