Date & Time
This setting allows you to set the date/time format, as well as the current date and time for the camera. This is usually done when you first set up the camera; however, you may need to
NOTE The date/time format chosen will be used to display the date information in Playback. Also, the format chosen in this setting is what is used in the Date & Time Imprint feature (see Date & Time Imprint on page 51).
1In the Setup Menu (page 79), select Date & Time.
2In the Date & Time 
buttons.
3Press the 
buttons to move to the other selections.
4Repeat steps 2 and 3 until the
correct date/time format, date, and time are set.
5Press Menu/OK to save the setting and return to the Setup Menu.
The date/time format setting remains in effect until it is changed again, even when you turn the camera off. The date and time settings also remain current as long as the camera batteries that are installed have a charge, or, if the batteries are removed, it is for less than 10 minutes, or the camera is connected to an optional HP AC power adapter.
82 | HP Photosmart M407 User’s Manual |