HP M23 manual Them in the camera again. If

Problem	Possible Cause	Solution
The camera	The wrong AC	Use only the HP AC power
batteries will	power adapter	adapter approved for use with
not charge	is being used.	this camera (see page 159).
(continued).
	Battery voltage	The camera will not attempt to
	is too low for	charge NiMH batteries that
	charging to	may be damaged or over-
	start.	discharged. Remove the
		batteries from the camera and
		charge them in the optional
		HP Photosmart Quick
		Recharger for M-series cameras
		(purchased separately), then try
		them in the camera again. If
		this does not work, it is likely
		that one or both of the batteries
		are bad. Purchase new NiMH
		batteries and try again.
	The batteries	NiMH batteries degrade over
	are damaged or	time and can fail. If the camera
	bad.	detects a problem with the
		batteries, it will not start
		charging or will stop charging.
		Purchase new batteries.
	Batteries are not	Ensure that the batteries are
	inserted	inserted correctly (see
	correctly.	page 12).
The camera	The camera is	Turn on the camera, or turn it
does not	turned off or has	off and then on again.
respond when	shut down.
I press a
	The batteries	Replace or recharge the
button.
	are drained.	batteries.

116 HP Photosmart M22/M23 User’s Manual