HP M23 manual Error Saving

Message	Possible Cause	Solution
ERROR SAVING	The optional	• Always wait until the
IMAGE.	memory card that	Power/Memory light
or	is installed was	stops blinking before
ERROR SAVING	removed before	removing the memory
VIDEO.	the camera	card from the camera.
	finished writing	• With the camera
	to the card or	turned off, remove the
	was half-locked.	memory card and
		check to see if the
		locking tab on the
		edge of the card is fully
		in the unlocked
		position.
Cannot display	The image was	• The image may still be
image	taken with	okay. Transfer the
<filename>.	another camera	image to a computer
	or the image file	and try opening it with
	was corrupted	the HP Image Zone
	when the camera	software.
	was shut down	• Do not remove the
	improperly.	memory card when the
		camera is turned on.
Camera has	The camera may	Turn the camera off, if it is
experienced an	have	on, and then on again. If
error.	experienced a	that does not fix the
or	transient	problem, try resetting the
Camera has	problem.	camera (see page 104). If
experienced an		the problem persists, note
error and is		the error code and then
shutting down.		call HP Support (see
		page 142).

Troubleshooting and Support 135