Toshiba TCB-BC1602UUL installation manual „ Setting the louver lock Louver position fixing

Page 6

Air-dischage direction kit

Installation Manual

„Setting the louver lock (Louver position fixing)

• Fix the louver at the air flow blockage portions. (For the setting methods, follow the procedures below.)

1 Push the LOUVER (Right button) for more than 4 seconds while the air conditioner is stopped.

The blinks.

2 Push the UNIT (Left button) to select the indoor unit you want to set.

Every time you push the button, the Unit No. changes.

The fan of the selected indoor unit starts its operation and the louvers swing.

Unit No.

 

 

 

 

 

Unit No.

1-1

 

 

1-2

Unit No.

 

 

 

 

 

Unit No.

1-4

 

 

 

1-3

 

 

F1

 

 

 

 

 

F2

 

 

 

 

F4

 

 

 

 

 

F3

 

 

 

 

 

3 Push the TEMP. / buttons to display the louver No. with the wind shield applied.

The selected louver starts to swing.

4 Select the code 0001 by pushing the TIME / buttons.

5 Push the button to define the setting contents.

After the setting contents is defined, the mark lights. (Return to step 3 if there are other two wind shields.)

6 Push the button to exit the setting.

“F1” is displayed in the CODE No. on the remote controller display.

This means that the 01 louver shown on the illustration is selected.

Louver fixing position code

Louver No.

Electric parts box

Refrigerant piping

Drain piping

(Louver No. diagram)

„Confirming the installation

•After the installation completes, perform the test run to confirm that no abnormality is found.

•For your future reference, please keep the installation manual on your side.

5-EN

– 5 –

Page 5 Page 7
Image 6
Page 5 Page 7
Contents TCB-BC1602UUL Accessories Applicable Models and ApplecationsInstallation Methods „ Installing the wind shields and packings„ Installing the indoor unit „ Changing the setting Push + + buttons simultaneously for more than 4 secPushing the button enters to the normal stop status „ Setting the louver lock Louver position fixing „ Confirming the installationPush the button to exit the setting Memo EH99678401

TCB-BC1602UUL specifications

The Toshiba TCB-BC1602UUL is a prominent model in Toshiba's lineup of electronic components, specifically designed for a variety of applications including home appliances, automotive systems, and consumer electronics. This component stands out due to its robust performance, energy efficiency, and innovative features that enhance usability and functionality.

One of the key characteristics of the TCB-BC1602UUL is its compact design, which allows for easy integration into tight spaces. This makes it ideal for devices where size constraints are critical, without compromising on performance. The unit is built with advanced semiconductor technology, ensuring high reliability and durability under various operating conditions.

Another significant feature of the TCB-BC1602UUL is its wide operating voltage range. This versatility enables it to cater to different power supply configurations, making it suitable for a diverse array of systems. Additionally, the component incorporates advanced thermal management technologies, which help maintain optimal performance by dissipating heat effectively. This is particularly important in scenarios where the device might experience prolonged use or fluctuating power loads.

Moreover, the TCB-BC1602UUL is equipped with various safety features, including overvoltage protection and short-circuit prevention. These protective measures not only enhance the safety of the device but also contribute to the longevity of the component, ensuring that it performs reliably over time.

The TCB-BC1602UUL also includes advanced communication technologies, allowing it to interface seamlessly with other devices and systems. This connectivity feature enables smart functionalities, making it a pivotal component in the development of IoT (Internet of Things) applications. The ability to communicate with other devices allows for remote monitoring and control, increasing the efficiency of systems in which it is integrated.

In terms of energy efficiency, the TCB-BC1602UUL adheres to the latest environmental standards, making it a choice for manufacturers looking to reduce their carbon footprint. Its low power consumption not only saves energy but also minimizes operational costs, making it a cost-effective solution for both manufacturers and end users.

In conclusion, the Toshiba TCB-BC1602UUL is a versatile, reliable, and efficient component suited for a wide range of applications. With its compact design, wide operating voltage, advanced safety features, and energy efficiency, it is an excellent choice for designers and engineers aiming to create innovative and sustainable products.
Top Page Image Contents