HP 7867 (US) manual Adding Memory, Installing a Dimm

6Hold the release tab down as you rotate the cage up and lift it out.

Adding Memory

The motherboard contains 168-pin DIMM (dual-inline memory module) sockets; the exact number of sockets depends on which model you have. You can install these types of DIMMs in the system:

n64 MB SDRAM

n128 MB SDRAM

n256 MB SDRAM

All installed memory modules must be 168- pin unbuffered SDRAM (synchronous dynamic random access memory) DIMMs and compliant with the Intel® PC SDRAM Unbuffered DIMM Specification.

The HP Pavilion ships with one or more DIMMs, but you can replace the existing DIMM(s) with higher capacity ones.

Installing a DIMM

To install a DIMM:

1Turn off the computer and all peripherals.

2Disconnect the modem/phone cable.

3Disconnect the power cord and all other attached cables (such as the keyboard, mouse, and monitor).

4Remove the side panel (see “Removing the Side Panel” on page 3).

5Gently lay the computer on its side.