Standby mode also allows faxes to come through to the computer, and it enables the PC to automatically retrieve
To manually put the computer in standby:
1Press the Standby button on the keyboard. The screen goes dark, and the computer goes into standby mode.
2When you want to use the computer again, press a key on the keyboard, or press the Standby button. The screen display reappears just as you left it.
Another way to manually put the computer into standby is to:
1Click Start on the taskbar.
2Click Turn Off Computer.
3Click Stand By.
If the computer does not work properly when you wake it from standby, reset the computer: Press and hold the On button on the front of the PC for approximately 5 seconds until the system turns off. Then turn the computer back on.
Note: Using the On button to reset the system is not recommended, and should be used only as a last resort.
Basics |
Quick Start Guide 29