HP SR5505F, SR5548F, SR5507F, SR5508F, SR5552F, SR5550F Advanced Setup Guide features vary by model

3Connect the front stereo mini-jack end of a Y adapter cable into the lime green Audio Line Out connector that matches the back of your computer.

3 6 S

NOTE:

￿Type 3 is three connectors.

￿Type 6 is six connectors.

￿Type S is sound card.

NOTE: Receiver/amplifier input connectors may be labeled Surround, 5.1 Channel inputs, 6 Channel inputs, CD, DVD, or DVD In.

Connect the left and right ends of the Y adapter cable into the front left (L) and right (R) inputs on the back of the receiver/amplifier.

4If you have rear speakers, connect the rear stereo mini-jack end of a Y adapter cable into the Audio Line In (blue) or the Rear Speaker Out (black) connector that matches the back of your computer.

3 6 S

￿Connect the left and right ends of the Y adapter cable into the rear left (L) and right (R) inputs on the back of the receiver/amplifier.

5If you have a center/subwoofer speaker, connect the stereo mini-jack of a Y adapter cable into the microphone (pink) connector or the center speaker/subwoofer (gold) connector that matches the back of your computer.

3 6 S

￿Connect the left and right ends of the Y adapter cable into the center/subwoofer inputs on the back of the receiver/amplifier (6/5.1 or higher-channel system).

￿Plug the Y adapter cable into the subwoofer connector on the back of the receiver even if a subwoofer is not used.

6Turn on the receiver/amplifier.

7Select the receiver/amplifier input that the Y adapter cables are plugged into.

8Turn on the computer.

32Advanced Setup Guide (features vary by model)