HP dx2450 manual Enww

Page 45

5.Attach the two screws that secure the hard disk drive cage to the chassis. Figure 2-34Securing the Hard Drive Cage

6.If installing a new drive, connect the opposite end of the data cable to the appropriate system board connector.

NOTE: If your system has only one SATA hard drive, you must connect the hard drive data cable to the dark blue connector labeled SATA0 to avoid any hard drive performance problems. If you are adding a second hard drive, connect the data cable to the next available (unpopulated) SATA connector on the system board in the following order: SATA0, SATA1, SATA3, SATA2.

7.Replace the computer access panel.

8.Reconnect the power cord and any external devices, then turn on the computer.

9.Lock any security devices that were disengaged when the access panel was removed.

NOTE: If you are replacing the primary hard drive, use the Recovery Disc Set to restore the operating system, software drivers, and any software applications that were preinstalled on the computer.

ENWW	Installing Additional Drives 39

Image 45

Contents Hardware Reference Guide dx2450 Microtower Model Hardware Reference Guide About This Book Iv About This Book Table of contents Appendix D Electrostatic Discharge Standard Configuration Features Product Features1Front Panel Components Front Panel Components2Media Card Reader Components Media Card Reader Components3Rear Panel Components Rear Panel Components4Keyboard Components Keyboard5Windows Logo Key Functions Using the Windows Logo Key6Serial Number and Product ID Location Serial Number LocationHardware Upgrades 1Removing the Computer Access Panel Removing the Computer Access Panel2Replacing the Computer Access Panel Hardware Upgrades Replacing the Computer Access Panel3Removing the Front Bezel Removing the Front BezelRemoving Bezel Blanks 5Replacing the Front Bezel Replacing the Front BezelInstalling Additional Memory DIMMsDDR2-SDRAM DIMMs Description Socket Color Populating Dimm SocketsInstalling DIMMs Enww 1Expansion Slot Locations Removing or Installing an Expansion CardRemoving or Installing an Expansion Card 11Removing a Standard PCI Expansion Card Hardware Upgrades Enww Enww 15Drive Positions Drive Positions16Extra Drive Retainer Screws Location Hardware Upgrades Installing Additional DrivesInstalling Additional Drives 2System Board Drive Connections System Board Drive ConnectionsRemoving an Optical Drive 19Removing the Optical Drive Hardware Upgrades 20Installing the Optical Drive Installing an Optical Drive into the 5.25-inch Drive BayRemoving an External 3.5-inch Drive Enww 24Removing a 3.5-inch Device Media Card Reader Shown Installing a Drive into the 3.5-inch External Drive BayEnww Removing an Internal 3.5-inch Hard Drive Enww 30Removing the Hard Drive Hardware Upgrades 31Installing the Hard Drive in the Drive Cage Installing an Internal 3.5-inch Hard Drive33Installing the Hard Drive Cage Hardware Upgrades Enww Table A-1Specifications SpecificationsRated Input Current maximum Battery Replacement Type Enww Installing a Security Lock External Security DevicesCable Lock HP Business PC Security Lock PadlockEnww Enww Electrostatic Discharge Preventing Electrostatic DamageGrounding Methods Computer Operating Guidelines and Routine Care Cleaning Optical Drive PrecautionsSafety Shipping PreparationIndex Enww