HP dx2450 manual Electrostatic Discharge, Preventing Electrostatic Damage, Grounding Methods

Page 55

D Electrostatic Discharge

A discharge of static electricity from a finger or other conductor may damage system boards or other static-sensitive devices. This type of damage may reduce the life expectancy of the device.

Preventing Electrostatic Damage

To prevent electrostatic damage, observe the following precautions:

Avoid hand contact by transporting and storing products in static-safe containers.

Keep electrostatic-sensitive parts in their containers until they arrive at static-free workstations.

Place parts on a grounded surface before removing them from their containers.

Avoid touching pins, leads, or circuitry.

Always be properly grounded when touching a static-sensitive component or assembly.

Grounding Methods

There are several methods for grounding. Use one or more of the following methods when handling or installing electrostatic-sensitive parts:

Use a wrist strap connected by a ground cord to a grounded workstation or computer chassis. Wrist straps are flexible straps with a minimum of 1 megohm +/- 10 percent resistance in the ground cords. To provide proper ground, wear the strap snug against the skin.

Use heelstraps, toestraps, or bootstraps at standing workstations. Wear the straps on both feet when standing on conductive floors or dissipating floor mats.

Use conductive field service tools.

Use a portable field service kit with a folding static-dissipating work mat.

If you do not have any of the suggested equipment for proper grounding, contact an HP authorized dealer, reseller, or service provider.

NOTE: For more information on static electricity, contact an HP authorized dealer, reseller, or service provider.

ENWW

Preventing Electrostatic Damage 49

Image 55
Contents Hardware Reference Guide dx2450 Microtower Model Hardware Reference Guide About This Book Iv About This Book Table of contents Appendix D Electrostatic Discharge Standard Configuration Features Product Features1Front Panel Components Front Panel Components2Media Card Reader Components Media Card Reader Components3Rear Panel Components Rear Panel Components4Keyboard Components Keyboard5Windows Logo Key Functions Using the Windows Logo Key6Serial Number and Product ID Location Serial Number LocationHardware Upgrades 1Removing the Computer Access Panel Removing the Computer Access Panel2Replacing the Computer Access Panel Hardware Upgrades Replacing the Computer Access Panel3Removing the Front Bezel Removing the Front BezelRemoving Bezel Blanks 5Replacing the Front Bezel Replacing the Front BezelDIMMs Installing Additional MemoryDDR2-SDRAM DIMMs Description Socket Color Populating Dimm SocketsInstalling DIMMs Enww 1Expansion Slot Locations Removing or Installing an Expansion CardRemoving or Installing an Expansion Card 11Removing a Standard PCI Expansion Card Hardware Upgrades Enww Enww 15Drive Positions Drive Positions16Extra Drive Retainer Screws Location Hardware Upgrades Installing Additional DrivesInstalling Additional Drives 2System Board Drive Connections System Board Drive ConnectionsRemoving an Optical Drive 19Removing the Optical Drive Hardware Upgrades 20Installing the Optical Drive Installing an Optical Drive into the 5.25-inch Drive BayRemoving an External 3.5-inch Drive Enww 24Removing a 3.5-inch Device Media Card Reader Shown Installing a Drive into the 3.5-inch External Drive BayEnww Removing an Internal 3.5-inch Hard Drive Enww 30Removing the Hard Drive Hardware Upgrades 31Installing the Hard Drive in the Drive Cage Installing an Internal 3.5-inch Hard Drive33Installing the Hard Drive Cage Hardware Upgrades Enww Table A-1Specifications SpecificationsRated Input Current maximum Battery Replacement Type Enww External Security Devices Installing a Security LockCable Lock HP Business PC Security Lock PadlockEnww Enww Preventing Electrostatic Damage Electrostatic DischargeGrounding Methods Computer Operating Guidelines and Routine Care Shipping Preparation Optical Drive PrecautionsCleaning SafetyIndex Enww