HP dx2450 manual Installing an Internal 3.5-inch Hard Drive

Page 43

Installing an Internal 3.5-inch Hard Drive

1.Follow the steps in Removing an Internal 3.5-inch Hard Drive on page 34 to remove the hard drive cage and, if necessary, the existing hard drive.

2.Slide the new drive into the hard disk drive cage (1), aligning the drive with the four screw holes on the cage. Install the four 6-32 standard screws that secure the hard disk drive to the hard disk drive cage (2). Make sure the hard disk drive cables are facing the top of the drive cage.

NOTE: If you are replacing an old drive with a new drive, use the four retainer screws from the old drive to install the new drive.

NOTE: If you are installing a second hard drive, use four of the extra standard 6-32 screws that are installed on the interior of the front bezel. The 6-32 screws are silver. Refer to Installing Additional Drives on page 24 for an illustration of the retainer screws location.

Figure 2-31Installing the Hard Drive in the Drive Cage

ENWW

Installing Additional Drives 37

Image 43
Contents Hardware Reference Guide dx2450 Microtower Model Hardware Reference Guide About This Book Iv About This Book Table of contents Appendix D Electrostatic Discharge Standard Configuration Features Product Features1Front Panel Components Front Panel Components2Media Card Reader Components Media Card Reader Components3Rear Panel Components Rear Panel Components4Keyboard Components Keyboard5Windows Logo Key Functions Using the Windows Logo Key6Serial Number and Product ID Location Serial Number LocationHardware Upgrades 1Removing the Computer Access Panel Removing the Computer Access Panel2Replacing the Computer Access Panel Hardware Upgrades Replacing the Computer Access Panel3Removing the Front Bezel Removing the Front BezelRemoving Bezel Blanks 5Replacing the Front Bezel Replacing the Front BezelDIMMs Installing Additional MemoryDDR2-SDRAM DIMMs Description Socket Color Populating Dimm SocketsInstalling DIMMs Enww 1Expansion Slot Locations Removing or Installing an Expansion CardRemoving or Installing an Expansion Card 11Removing a Standard PCI Expansion Card Hardware Upgrades Enww Enww 15Drive Positions Drive Positions16Extra Drive Retainer Screws Location Hardware Upgrades Installing Additional DrivesInstalling Additional Drives 2System Board Drive Connections System Board Drive ConnectionsRemoving an Optical Drive 19Removing the Optical Drive Hardware Upgrades 20Installing the Optical Drive Installing an Optical Drive into the 5.25-inch Drive BayRemoving an External 3.5-inch Drive Enww 24Removing a 3.5-inch Device Media Card Reader Shown Installing a Drive into the 3.5-inch External Drive BayEnww Removing an Internal 3.5-inch Hard Drive Enww 30Removing the Hard Drive Hardware Upgrades 31Installing the Hard Drive in the Drive Cage Installing an Internal 3.5-inch Hard Drive33Installing the Hard Drive Cage Hardware Upgrades Enww Table A-1Specifications SpecificationsRated Input Current maximum Battery Replacement Type Enww External Security Devices Installing a Security LockCable Lock HP Business PC Security Lock PadlockEnww Enww Preventing Electrostatic Damage Electrostatic DischargeGrounding Methods Computer Operating Guidelines and Routine Care Shipping Preparation Optical Drive PrecautionsCleaning SafetyIndex Enww