HP dc7800 tower manual Memory Upgrading, Memory Mapping and Pre-allocation, Memory Socket Loading

Page 35

Processor/Memory Subsystem

3.3.1 Memory Upgrading

Table 3-2 shows suggested memory configurations for these systems. Note that the USDT form factor provides only two memory sockets.

Table 3-2 does not list all possible configurations.

Table 3-2.

Memory Socket Loading [1]

 

 

 

Channel A

Channel B

 

Socket 1

Socket 2 [2]

Socket 3

Socket 4 [2]

Total

 

 

 

 

 

512 MB

none

none

none

512-MB

512 MB

none

512 MB

none

1-GB [3]

1-GB

none

none

none

1-GB

1 GB

none

1 GB

none

2 GB [3]

1 GB

1 GB

1 GB

1 GB

4-GB [3]

2 GB

none

2 GB

none

4-GB [3]

4 GB

4 GB

4 GB

4 GB

16-GB [3, 4]

NOTE:

[1]USDT form factor uses SODIMM sockets. SFF and CMT form factors use DIMM sockets.

[2]Not present on USDT form factor.

[3]Dual-channel symetrical

[4]Only SFF and CMT support this size memory

HP recommends using symmetrical loading (same-capacity, same-speed modules across both channels) to achieve the best performance.

CAUTION: Always power down the system and disconnect the power cord from the AC outlet before adding or replacing memory modules. Changing memory modules while the unit is plugged into an active AC outlet could result in equipment damage.

Memory amounts over 3 GB may not be fully accessible with 32-bit operating systems due to system resource requirements. Addressing memory above 4 GB requires a 64-bit operating system.

3.3.2Memory Mapping and Pre-allocation

Figure 3-2 shows the system memory map. The Q45 Express chipset includes a Management Engine that pre-allocates a portion of system memory (16 MB for one module, 32 MB for two modules) for managment functions. In addition, the internal graphics controller pre-allocates a portion of system memory for video use (refer to chapter 6). Pre-allocated memory is not available to the operating system. The amount of system memory reported by the OS will be the total amount installed less the pre-allocated amount.

 

Technical Reference Guide

www.hp.com

3-5

Image 35
Contents September Technical Reference GuideTechnical Reference Guide Contents Input/Output Interfaces Processor/Memory SubsystemSystem Support Integrated Graphics Subsystem Power and Signal DistributionError Messages and Codes Index System BiosOnline Viewing IntroductionAbout this Guide Additional Information SourcesValues Serial NumberNotational Conventions Special NoticesAcronym or Abbreviation Description Common Acronyms and AbbreviationsAcronyms and Abbreviations Cmos CDSCGA CMCEscd EisaEPP EideLCD IRQISA LANPCA ODDPAL PataSgram SdvoSEC SecamVAC URLUSB UTPIntroduction Introduction System OverviewFeatures 1ODD Feature Difference Matrix by Form FactorSodimm Dimm Function System ArchitectureArchitectural Differences By Form Factor HP Compaq dc7900 Business PC Architecture, Block diagram Intel Processor Support Components Function ChipsetChipset Components and Functionality Component Name Function Support ComponentsSystem Memory Support Component FunctionsNetwork Interface Controller Mass StorageSerial Interface Universal Serial Bus InterfaceIntegrated Graphics Controller Graphics SubsystemAudio Subsystem Integrated Graphics Subsystem StatisticsParameter Operating Non-operating SpecificationsEnvironmental Specifications Factory Configuration Power Supply Electrical SpecificationsParameter Usdt SFF CMT Physical SpecificationsCD-RW/DVD-ROM Combo Optical Drive SpecificationsHP SuperMulti LightScribe ParameterParameter 80 GB 160 GB 250 GB Hard Drive SpecificationsProcessor/Memory Subsystem Architecture Processor/Memory SubsystemIntel Processor Overview Intel ProcessorsForm Processor Changing/UpgradingSupported Processors partial listing ClockMemory Subsystem Channel a Channel B Socket Socket 2 Socket 4 Total Memory UpgradingMemory Mapping and Pre-allocation Memory Socket LoadingSystem Memory Map for maximum of 8 gigabytes PCI 2.3 Bus Operation System SupportPCI Bus Overview PCI Component Function # Device # Wired to PCI Component Configuration Access PCI BusPCI Bus Mastering Devices PCI Express Bus OperationSoftware/Driver Layer Transaction Protocol LayerLink Layer PCI Power Management SupportOption ROM Mapping PCI InterruptsPCI 2.3 Bus Connector Pinout PCI ConnectorsPCI 2.3 Connector PCI Express Bus Connector Pinout PCI Express ConnectorsMode Apic ModeSystem Resources InterruptsPCI Interrupt Distribution Direct Memory AccessClearing Cmos Real-Time Clock and Configuration MemorySecurity Functions Configuration Memory Cmos MapSystem Management Standard Cmos LocationsInterface Security Power-On / Setup PasswordSetup Password Cable Lock ProvisionAcpi Wake-Up Event System Wakes From Power ManagementSmart Cover Lock Optional Acpi Wake-Up EventsSystem Operational Status LED Indications System Status PowerLED Beeps Action RequiredSystem Status Thermal Sensing and CoolingSystem I/O Map Register Map and Miscellaneous FunctionsPort Function System I/O MapSIO Controller Functions Gpio FunctionsICH10 Functions Input/Output Interfaces Pin Description Pin Sata Connector PinoutSATA/eSATA Interfaces Sata interfaceESATA interface Optional eSATA Bracket/Cable AssemblyDiskette Drive Interface Pin Signal Description Pin Diskette Drive Connector PinoutSerial Interface DB-9 Serial Connector PinoutParallel Interface Support Standard Parallel Port ModeEnhanced Parallel Port Mode Extended Capabilities Port ModePin Signal Function Parallel Interface ConnectorDB-25 Parallel Connector Pinout Keyboard Interface Operation Keyboard/Pointing Device InterfaceData Keyboard/Pointing Device Interface ConnectorKeyboard/Pointing Device Connector Pinout Pointing Device Interface OperationICH10 USB Port Mapping USB ConnectorController Signals USB Connector Location all form factors Universal Serial Bus InterfaceUSB Color Code USB Connector PinoutUSB Cable Data USB Cable Length DataAudio Subsystem Audio Subsystem Functional Block DiagramAudio Multistreaming HD Audio ControllerHD Audio Link Bus ADC/DAC Audio SpecificationsHD Audio Subsystem Specifications Parameter MeasurementLAN I/F NIC Network Interface ControllerAlert Standard Format Support Power Management SupportWake-On-LAN Support Parameter Compatibility standard orprotocol NIC ConnectorNIC Specifications NIC SpecificationsIntegrated Graphics Subsystem RGB Functional DescriptionGMA 4500 Memory Allocation Sdram Installed Maximum Memory AllocationIGC Standard 2D Display Modes Resolution Maximum Refresh Rate Analog Digital MonitorDisplay Modes Upgrading DB-15 Monitor Connector Pinout Monitor ConnectorsAnalog Monitor Connector Pin Signal DisplayPort ConnectorIntegrated Graphics Subsystem Usdt Power Distribution Power and Signal DistributionPower Distribution Usdt 135-Watt Power Supply Unit Specifications 2 SFF/CMT Power DistributionMin Range Current Max Surge Tolerance Loading Ripple SFF 240-Watt Power Supply Unit SpecificationsRange or Min Current Max Surge Tolerance Loading Ripple CMT 365-Watt Power Supply Unit SpecificationsEnergy Star Compliancy Shows the power supply cabling for CMT systemsPressed Power Button Results Power ControlPower Button Power Button ActionsPower LED Indications Condition Wake-On-LAN Wake Up EventsConsumption To S0 by Required System Power StatesPower Transition OS Restart State System ConditionCR1 +5 VDC LED Signal DistributionSystem Board Component Designations Power and Signal Distribution System Bios Changeable Splash Screen ROM FlashingUpgrading Memory Detection and Configuration Boot FunctionsBoot Device Order Network Boot F12 SupportVisual power LED Audible speaker Meaning Boot Error CodesBoot Error Codes Client Management Functions INT15 Function ModeClient Management Functions Subsystem Temperature StatusSystem ID and ROM Type System ID NumbersType Data Smbios FunctionsManagement Engine Functions USB Legacy SupportBeeps Power LED Probable Cause Error Messages and CodesBeep/Power LED Codes Table A-1 Beep/Power LED CodesPower-On Self Test Post Messages Table A-2 Table A-2 Error Message Probable CauseTable A-3 System Error Messages Probable Cause System Error MessagesMessage Probable Cause Memory Error MessagesMemory Error Messages Table A-4Table A-5 Keyboard Error Messages Probable Cause Keyboard Error MessagesTable A-7 Video Graphics Error Messages Probable Cause Printer Error MessagesVideo Graphics Error Messages Table A-6 Printer Error Messages Probable CauseTable A-8 Diskette Drive Error Messages Probable Cause Diskette Drive Error MessagesTable A-9 Serial Interface Error Messages Probable Cause Serial Interface Error MessagesModem Communications Error Messages Table A-11 System Status Error MessagesSystem Status Error Messages Table A-12 Hard Drive Error Messages Probable Cause Hard Drive Error MessagesXx = 03, Hard drive read/write compare test Table A-13 Hard Drive Error Messages Probable Cause Table A-15 Audio Error Messages Probable Cause Audio Error MessagesTable A-14 Video Graphics Error Messages Probable Cause Table A-17 Network Interface Error Messages Probable Cause 17 DVD/CD-ROM Error MessagesNetwork Interface Error Messages DVD/CD-ROM Error MessagesTable A-18 Scsi Interface Error Messages Scsi Interface Error Messages 65xx-xx, 66xx-xxPointing Device Interface Error Messages 8601-xx Error Messages and Codes Numerics IndexIndex
Related manuals
Manual 70 pages 29.59 Kb Manual 17 pages 59.95 Kb Manual 4 pages 40.15 Kb

dc7800 tower specifications

The HP dc7800 Tower is a powerful desktop computer designed for professional and enterprise environments. Known for its stability, performance, and versatility, this model has secured its place in a variety of business settings. Launched in the mid-2000s, it embodies HP’s commitment to quality and innovation.

One of the main features of the HP dc7800 is its form factor. The tower configuration allows for easy upgrades and maintenance, providing ample space for additional hard drives, memory, and other components. This level of accessibility makes it ideal for businesses that need to adapt their systems to changing requirements.

The dc7800 is powered by Intel's Core 2 Duo processors, offering dual-core technology that enhances multitasking capabilities. With clock speeds ranging from 1.8 GHz to 3.0 GHz, this system can handle demanding applications with relative ease. It also supports Intel's vPro technology, which allows for remote management and security features, making it an excellent choice for organizations prioritizing IT control.

Another notable characteristic is the support for up to 8GB of DDR2 RAM. This allows for efficient data processing and improved performance when running multiple applications simultaneously. Additionally, the dc7800 features multiple storage options, accommodating both SATA hard drives and solid-state drives, which can significantly enhance boot times and overall system responsiveness.

Connectivity options on the HP dc7800 are robust. It includes a variety of USB ports, audio jacks, and optional legacy ports, ensuring compatibility with a wide range of peripherals and accessories. Networking capabilities are also prominent, with built-in Gigabit Ethernet providing high-speed internet access.

Furthermore, the desktop tower is designed with energy efficiency in mind. It meets ENERGY STAR certification standards, which not only helps reduce operational costs but also minimizes environmental impact.

Overall, the HP dc7800 Tower embodies a blend of performance, expandability, and energy efficiency, making it a reliable choice for businesses in need of a robust desktop solution. With its legacy of dependability and its suite of modern technologies, it continues to serve as a valuable asset in enterprise environments.