HP 8000 tower manual Type Y to continue

Page 17

4.Type Y to continue.

2.Select or enter the desired RAID Level. Use the information on the bottom half of the screen if necessary.

3.Use the arrow keys to scroll to Create Volume, and press Enter. The following screen appears. WARNING: All data on the selected disk will be deleted.

4.Type Y to continue.

17

Image 17

Contents HP Compaq Elite 8000, 8100, 8200, and 8300 Business PCs AHCI and RAID onIntel Rapid Storage Technology HP business PC IntroductionIntel chipset Chipset componentsDefinitions Basics of AHCI and RAID TechnologyAcronym or term DescriptionBenefits of AHCI BIOS / Software / Hardware ConsiderationsBIOS Interface New operating system installationPathAndCredentials DriverPaths component settings unattend settings pass=offlineServicing?xml version=1.0 ? publicKeyToken=31bf3856ad364e35 language=neutral versionScope=nonSxSvalue 0=disabled 1=enabled HKLM\System\CCS\Services\iaStor\Parameters\PortX nameGTFEnhancing existing Windows XP images from IDE Mode GTF Support HP 8100 and 8200 Business PCs onlyBasic RAID Types LimitationsChanging AHCI to IDE Mode through the HP Replicated Setup Utility HardwareFigure 2 Performance - RAID 0 with three hard drives Figure 1 Performance - RAID 0 with two hard drivesRAID 0 with three hard drives is shown in Figure RAID 1 with two hard drives Mirror RAID 5 with three hard drives Intel Matrix RAID Technology Recommended configurations ConfigurationsUnsupported configurations Other supported configurationsEnabling RAID through F10 System BIOS Configuring RAID on non-factory preinstalled configurationsConfiguring RAID Volume using the Option ROM Accessing RAID Option ROM4. Type Y to continue Notes for operating system installation Intel Rapid Storage Technology software installation Using the Intel Rapid Storage Console interface to Configure RAID Migration to RAID 1 from two non-RAID hard drives RAID migrations using Intel Rapid Storage ConsoleMigration to RAID 0 from three non-RAID hard drives Migration to RAID 0 from two non-RAID hard drivesMigration to Matrix RAID 5 and RAID 0 from three non-RAID hard drives Migration to RAID 5 from three non-RAID hard drives12. Reboot the system after the migration finishes. NOTE Back up all data before proceeding Email notifications HP Elite 8200 and 8300 Business PCs only Configuring Intel Rapid Storage Console forMigration to Matrix RAID 1 and RAID 0 from two non-RAID hard drives Installation Language Table 8 Language supportAbbreviation Degradation hp.com/go/getconnected Get connected

Related manuals

Manual 18 pages 10.45 Kb

Manual 1 pages 60.13 Kb

Manual 114 pages 60.42 Kb