HP 8000 tower manual Intel Rapid Storage Technology software installation

Page 19

Intel Rapid Storage Technology software installation

Intel Rapid Storage Technology software installation

This section of the paper focuses on how to configure RAID using Intel Rapid Storage Technology software. The configuration steps are for application usage and supported RAID migrations.

1.Select Start > All Programs > Intel > Intel(R) Rapid Storage Console.

2.Click Next.

3.Read the driver agreement. If you agree, click Next.

4.Read the License Agreement. If you agree, click Yes.

5.Review the Readme for Intel Rapid Storage Technology, and then click Next.

6.Click Next, after the setup operations complete.

7.Click Next to finish the installation.

8.Select Restart Now or Restart Later, and then click Finish to close the setup.

9.Restart the computer.

19

Image 19

Contents HP Compaq Elite 8000, 8100, 8200, and 8300 Business PCs AHCI and RAID onIntel Rapid Storage Technology Chipset components IntroductionHP business PC Intel chipsetDescription Basics of AHCI and RAID TechnologyDefinitions Acronym or termNew operating system installation BIOS / Software / Hardware ConsiderationsBenefits of AHCI BIOS InterfacepublicKeyToken=31bf3856ad364e35 language=neutral versionScope=nonSxS settings pass=offlineServicingPathAndCredentials DriverPaths component settings unattend ?xml version=1.0 ?GTF Support HP 8100 and 8200 Business PCs only HKLM\System\CCS\Services\iaStor\Parameters\PortX nameGTFvalue 0=disabled 1=enabled Enhancing existing Windows XP images from IDE ModeHardware LimitationsBasic RAID Types Changing AHCI to IDE Mode through the HP Replicated Setup UtilityRAID 0 with three hard drives is shown in Figure Figure 1 Performance - RAID 0 with two hard drivesFigure 2 Performance - RAID 0 with three hard drives RAID 1 with two hard drives Mirror RAID 5 with three hard drives Intel Matrix RAID Technology Recommended configurations ConfigurationsUnsupported configurations Other supported configurationsEnabling RAID through F10 System BIOS Configuring RAID on non-factory preinstalled configurationsConfiguring RAID Volume using the Option ROM Accessing RAID Option ROM4. Type Y to continue Notes for operating system installation Intel Rapid Storage Technology software installation Using the Intel Rapid Storage Console interface to Configure RAID Migration to RAID 1 from two non-RAID hard drives RAID migrations using Intel Rapid Storage ConsoleMigration to RAID 0 from three non-RAID hard drives Migration to RAID 0 from two non-RAID hard drivesMigration to Matrix RAID 5 and RAID 0 from three non-RAID hard drives Migration to RAID 5 from three non-RAID hard drives12. Reboot the system after the migration finishes. NOTE Back up all data before proceeding Migration to Matrix RAID 1 and RAID 0 from two non-RAID hard drives Configuring Intel Rapid Storage Console forEmail notifications HP Elite 8200 and 8300 Business PCs only Installation Abbreviation Table 8 Language supportLanguage Degradation hp.com/go/getconnected Get connected

Related manuals

Manual 18 pages 10.45 Kb

Manual 1 pages 60.13 Kb

Manual 114 pages 60.42 Kb