HP 8000 tower manual Migration to Matrix RAID 1 and RAID 0 from two non-RAID hard drives

Page 25
Migration to Matrix RAID 1 and RAID 0 from two non-RAID hard drives

Migration to Matrix RAID 1 and RAID 0 from two non-RAID hard drives

The migration process for two hard drives to RAID Matrix Mode (0 + 1) is very similar to the process described in the section about migration of three hard drives to matrix mode RAID (0 + 5). The difference in the process is selecting two hard drives as part of the volume created and selecting RAID 5 instead of RAID 1.

Configuring Intel Rapid Storage Console for

Email notifications (HP Elite 8200 and 8300 Business PCs only)

To configure Intel Rapid Storage Console to send notifications of specified events to a designated email address, use the following steps:

1.Open the Intel Rapid Storage Console and select Preferences.

2.Select the type of event to initiate a notification (all three may be selected).

3.Enter the email information.

a. SMTP Host (required)

b. Port

c. Sender email address (required)

d. Recipient email address (at least one required)

4.When done click Apply Changes.

25

Image 25
Contents HP Compaq Elite 8000, 8100, 8200, and 8300 Business PCs AHCI and RAID onIntel Rapid Storage Technology HP business PC IntroductionIntel chipset Chipset componentsDefinitions Basics of AHCI and RAID TechnologyAcronym or term DescriptionBenefits of AHCI BIOS / Software / Hardware ConsiderationsBIOS Interface New operating system installationPathAndCredentials DriverPaths component settings unattend settings pass=offlineServicing?xml version=1.0 ? publicKeyToken=31bf3856ad364e35 language=neutral versionScope=nonSxSvalue 0=disabled 1=enabled HKLM\System\CCS\Services\iaStor\Parameters\PortX nameGTFEnhancing existing Windows XP images from IDE Mode GTF Support HP 8100 and 8200 Business PCs onlyBasic RAID Types LimitationsChanging AHCI to IDE Mode through the HP Replicated Setup Utility HardwareRAID 0 with three hard drives is shown in Figure Figure 1 Performance - RAID 0 with two hard drivesFigure 2 Performance - RAID 0 with three hard drives RAID 1 with two hard drives Mirror RAID 5 with three hard drives Intel Matrix RAID Technology Recommended configurations ConfigurationsUnsupported configurations Other supported configurationsEnabling RAID through F10 System BIOS Configuring RAID on non-factory preinstalled configurationsConfiguring RAID Volume using the Option ROM Accessing RAID Option ROM4. Type Y to continue Notes for operating system installation Intel Rapid Storage Technology software installation Using the Intel Rapid Storage Console interface to Configure RAID Migration to RAID 1 from two non-RAID hard drives RAID migrations using Intel Rapid Storage ConsoleMigration to RAID 0 from three non-RAID hard drives Migration to RAID 0 from two non-RAID hard drivesMigration to Matrix RAID 5 and RAID 0 from three non-RAID hard drives Migration to RAID 5 from three non-RAID hard drives12. Reboot the system after the migration finishes. NOTE Back up all data before proceeding Migration to Matrix RAID 1 and RAID 0 from two non-RAID hard drives Configuring Intel Rapid Storage Console forEmail notifications HP Elite 8200 and 8300 Business PCs only Installation Abbreviation Table 8 Language supportLanguage Degradation hp.com/go/getconnected Get connected
Related manuals
Manual 18 pages 10.45 Kb Manual 1 pages 60.13 Kb Manual 114 pages 60.42 Kb