HP 200-5110 manual Before You Begin Removing Memory, Removing and Replacing Memory

Removing and Replacing Memory

30–45 minutes

Before You Begin Removing Memory

Use the product specification for your model to find the correct type of DIMM (dual in-line memory module) for your computer and the maximum memory amount.

Memory upgrades may not be needed. Many computers already have the maximum amount of memory installed.

Observe the following requirements before removing and replacing memory.

Tools Needed

￿Flathead screwdriver

You can use a flathead screwdriver with the following screw (Torque screw).

CAUTION: Static electricity can damage the electronic components inside the computer. Discharge static electricity by touching the metal cage of the computer before touching any internal parts or electronic components.

WARNING:

￿ Never open the cover with the power cord attached or power applied. You may damage your computer or be injured from the spinning fan blades.

￿Avoid touching sharp edges inside the computer.

NOTE: Computer features may vary by model.

1Remove the Pocket Media Drive, if it is present. Remove the Personal Media Drive, if it is present.

2Turn off the computer.

3Disconnect all peripherals and cables from the front and the back of the computer. Disconnect the power cord last.

2 537500-001— Removing and Replacing Memory