7Slide the cage toward the bottom of the computer until it locks into place.
8Insert and tighten the two screws that secure the cage in the computer.
9Squeeze the top and bottom of the PMD connector and insert it into the top cage.
10Set the computer upright.
11Hold the front panel over the computer, and then press the left side of the panel, inserting the tabs into the computer. Swing the right side of the panel toward the computer, and then press it into the computer.
12Hold the side panel over the side of the computer with the front edge of the panel about 2.5 cm (1 inch) from the front of the computer.
| 9 |