HP de100c Connect dial-up or broadband, Power up, Dial-up Broadband Ethernet Broadband Home PNA

connect dial-up or broadband

Refer to “c” on the diagram on page 78. Follow the instructions in the appropriate column in the table below.

dial-up	broadband: Ethernet	broadband: Home PNA
Use the phone cord	Use your purchased Ethernet	Use the phone cord
provided:	cable:	provided:

1 Connect one end of the	If your router or home	If you have a home
phone cord to one of the	network requires an Ethernet	phoneline network (your
de100c’s phone jacks.	connection:	home is networked to your
2 Connect the other end to	1 Connect one end of your	router via telephone wire
		within the walls):
a phone jack in your	Ethernet cable to the
		1 Connect one end of the
home.	de100c’s Ethernet port.
	2 Connect the other end to	phone cord to one of the
		de100c’s phone jacks.
	your router (or to a
		2 Connect the other end of
	networked RJ45 jack in
	your home).	the phone cord to a
		networked phone jack in
		your home.

power up

Refer to “d” on the diagram on page 78.

1Connect the power cord to the de100c and plug it into a grounded wall outlet.

2Put the batteries into the remote control.

tip

To share a household phone jack between your de100c and a telephone, either:

■plug the phone splitter into your household phone jack, then connect the de100c and the phone to the splitter

or

■plug your telephone’s cord into the de100c’s second phone jack

installing and setting up

hp digital entertainment center owner’s guide 81